Playback Features
Starting disc playback
1Turn on the TV and select the correct video input.
2Press 8 to turn on the DVD player.
3Press OPEN/CLOSE ; to open the disc tray.
4Place a disc into the disc tray with the
label facing up, then press OPEN/CLOSE
;to close the disc tray.
For
5Playback may start automatically. If not, press PLAY/PAUSE q/h.
If a disc menu appears on the TV, see next page > Using the disc menu.
If the child lock was activated for the
inserted disc, you have to enter your four- digit password (see DVD Menu options > Password). ( page 29)
See the next few pages for other playback features under ‘ Playback features ’.
Tips:
–Do not overturn the DVD player while disc loading, playing or ejecting.
–Do not close the disc tray manually even if the standby/on switched off.
Basic playback controls
Unless otherwise stated, all operations described are based on remote control use.
Pausing playback
1During playback, press PLAY/PAUSE q/h to pause playback and display a still picture.
Sound will be muted.
2To resume normal playback, press PLAY/ PAUSE q/h again.
Skipping title/chapter/track
To select sequentially
Press SKIP u / i to go to the previous or next title/chapter/track.
To select directly (chapter/track only) Use the numeric keypad
e.g., 5: 5
15: >=10 1 5
Stopping playback
Press STOP g.
The stopped position is memorized.
Resume play function
Press PLAY/PAUSE q/h to restart from this position.
The position is cleared if the tray is opened or you press STOP g several times to display ‘g’ on TV’s display.
Tips:
–Screen saver will start automatically if the disc playback is stopped for about 5 minutes.
–The player will automatically switch to Power Standby mode if you do not press any buttons for about 25 minutes after the
disc has stopped playing (only when {Auto Power Off} is set to {On}) ( page 26).
Tips: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.
18