Panasonic DMP-BD605, DMP-BD80 warranty Network, Others

To select these options, perform steps 1–4 (> 32)

“Network”

IP Address/DNS Settings (> 17)

≥Press [OK] to show the following settings.

	Connection Test	— — — —
	IP Address Auto Configuration (DHCP)	≥On	≥Off
	IP Address	— — —. — — —. — — —. — — —
	Subnet Mask	— — —. — — —. — — —. — — —
	Default Gateway	— — —. — — —. — — —. — — —
	DNS Auto Configuration (DHCP)	≥On	≥Off
	Primary DNS	— — —. — — —. — — —. — — —
	Secondary DNS	— — —. — — —. — — —. — — —
	Auto Detect Connection Speed	≥On	≥Off
	Connection Speed Setting	≥10BASE Half Duplex		≥10BASE Full Duplex
	This is enabled only when “Auto Detect Connection Speed” is	≥100BASE Half Duplex		≥100BASE Full Duplex
	turned “Off”.
Proxy Server Settings (> 18)
≥Press [OK] to show the following settings.
	Reset to factory preset	≥Yes	≥No
	Proxy Address	(The initial setting is blank.)
	Proxy Port Number	(The initial setting is “0”.)
	Connection Test	— — — —
Network Service (> 27) (VIERA CAST)
≥Press [OK] to show the following settings.
	Network Lock	≥On	≥Off
	You can restrict using VIERA CAST.	Changing settings (When “On” is selected)
	≥Follow the on-screen instructions. Enter a 4-digit password with	≥Change Password
	the numbered buttons when the password screen is shown. It
	will be the common password for “DVD-Video Ratings”,
	“BD-Video Ratings” and “Network Lock“.
	≥Do not forget your password.
	Audio Auto Gain Control	≥On	≥Off
	Volume that is different depending on the contents is adjusted
	automatically to the standard volume while using the VIERA
	CAST.
	≥Depending on contents, this function effect will not work.
	≥Select “Off” when the audio is warped.
	Reduce to Screen Size	≥On	≥Off
	The screen is displayed reduced so the displayed screen of the
	content does not get truncated.
	Time Zone	≥GMT s12 to r12
	By selecting the time zone, it is possible to set the unit’s time to	(The initial setting is “s5”.)
	match your location.	GMT s5 l EST (Eastern Standard Time), GMT s6 l CST (Central Standard Time)
	≥Some VIERA CAST contents require the time zone to be set.	GMT s7 l MST (Mountain Standard Time), GMT s8 l PST (Pacific Standard Time)
	Set the time zone if necessary.	GMT s9 l AKST (Alaska Standard Time), GMT s10 l HST (Hawaii Standard Time)
	DST	≥On	≥Off
	Select “On” when using Daylight Saving time.

MAC Address (> 17)

Displays the “MAC Address” of this unit.

Settings

“Others”

Off Timer	≥2 Hours		≥6 Hours	≥Off
Select how long the unit remains on when it is not being used.
Remote Control Code (> 36)	≥Set Code 1		≥Set Code 2	≥Set Code 3
Quick Start	≥On:
Speed of startup from power off is increased.	≥Off:
≥When the setting of “Stand-by power save” is enabled on	Internal control unit will be powered when it is set to "On”, so contents of the
	following will be different from the time it is set to “Off”.
the TV that supports HDAVI Control 4, it will take longer to
	≥Idle power consumption will increase. (about the power consumption > 45)
startup this unit when the power supply of the TV is on	≥The cooling fan may turn slowly to prevent overheating of internal parts.
standby mode even if the “Quick Start” is set to “On”.
Easy Setting	≥Yes	≥No
You can execute basic settings (“On-screen Language”, “TV
Aspect”, “Analog Audio Output” [BD80], “Quick Start”).
				(Continued on the next page)

35

RQT9378