Panasonic DMP-BD80, DMP-BD60 Regarding 24p output BD-V, Necessary settings for audio output

Regarding 24p output [BD-V]

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in 60 frames/second in accordance with the display format.

These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.

NECESSARY CONNECTIONS

≥Connect to a TV supporting 1080/24p input via an HDMI cable.

NECESSARY SETTINGS

≥“24p Output”: “On” (> 34)

Getting started

Necessary settings for audio output

After connecting to the terminals, perform necessary settings.

“BD-Video	1)	While stopped
Secondary Audio”		Press [SETUP].
	2)	Press [3, 4] to select “Audio” and press [OK].
“Dolby D/Dolby D +/	3)	Press [3, 4] to select “Digital Audio Output” and press [OK].
Dolby TrueHD”	4)	Press [3, 4] to select “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”,
“DTS/DTS-HD”		or “BD-Video Secondary Audio” and press [2, 1] to select the option.

Audio

Dynamic Range Compression	Off
Digital Audio Output
PCM Down Conversion	Off
Downmix	Stereo
High Clarity Sound	Disable
OK
RETURN

“Analog Audio Output” [BD80]

1)While stopped Press [SETUP].

2)Press [3, 4] to select “TV / Device Connection” and press [OK].

3)Press [3, 4] to select “Analog Audio Output” and press [OK].

4)Press [3, 4] to select the option and press [OK].

5)Press [OK].

≥The channel setting screen is displayed. (> 37)

Connection
TV Aspect	16:9
HDMI Connection
Component Video Resolution	480i
Analog Audio Output	2ch + 5.1ch
OK
RETURN

≥For more information about settings, refer to page 33, 34, 37.

≥When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect. In the following case, set “HDMI Audio Output” to “Off”. (> 34)

–[BD80]: When connecting a compatible amplifier/receiver using 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals, and connecting a compatible television using HDMI AV OUT terminal

–[BD80]: When connecting a compatible amplifier/receiver using both 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals and HDMI AV OUT terminal if outputting the audio from analog terminals

–When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HDMI AV OUT terminal

To return to the previous screen

Press [RETURN].

To exit the screen

Press [SETUP].

9

RQT9378