Using for the first time
Remove the insulating sheet
insulating sheet
Attach the specialized band
If the 3D Eyewear slips out of place, use the specialized band included to hold it in place.
Attach the band to the left and right tips of the frame, and adjust the length.
Specialized band
Attach the nose pad If required, use the included nose pad.
Nose pad A adjusts the attachment position of the 3D Eyewear between 2 vertical levels.
(Slot 2 of the 3 protrusions on the 3D Eyewear deeply into the holes on nose pad A.) When using nose pad B, ensure that all 3 protrusions on the 3D Eyewear are
inserted deeply into the 3 holes on nose pad B.
Nose pad A
Replacing the batteries
When the remaining battery level is low, the Indicator lamp flashes 5 times upon turning the 3D Eyewear power ON. (Early battery replacement is recommended.)
Viewing
Viewing 3D
Loosen the screw from the cover using the screwdriver (included).
screwdriver
Note
Use the specified type of battery
Do not insert the battery with the polarity (plus and minus ) backwards.
Dispose of the old batteries as
images on TV
Replace the battery, and then replace the cover.
Always tighten the screw to hold the battery case cover in place.
23