Panasonic TC-P54VT25, TC-P50VT25 quick start Network Settings

(continued)

[IP setting]
Select “IP setting mode” and set to	Manual setting
“Automatic”	Select “IP setting mode” and set to “Manual”
(When IP automatic acquisition in DHCP can be used)	Select the item and press OK

Menu	IP address/DNS settings	1/2	select
	IP setting mode	Automatic
	IP address	192.168.0.5
	Subnet mask	255.255.255.0	OK
	Default gateway	192.168.0.254

The acquired address is displayed.

Check the specifications of the broadband router and enter each IP address

Subnet mask 0 . 0 . 0 . 0

or change channel

OK

Each IP address is acquired automatically

[DNS settings]	Manual setting
Select “DNS setting mode” and set to “Automatic”
(When DNS automatic acquisition in DHCP can be used)	Select “DNS setting mode” and set to “Manual”

Menu	IP address/DNS settings	1/2	select	Select the item and press OK
	IP setting mode	Manual		Enter each IP address as was specified by the
	Default gateway	192.168.0.254
	DNS setting mode	Automatic	OK	provider
	Primary DNS	192.168.0.20
	Secondary DNS	192.168.0.21		Primary DNS	0 .	0 .	0 .	0

The acquired address is displayed.

	Each IP address is acquired automatically						or	select
If you are using a broadband router, IP automatic acquisition in DHCP can be								OK
used under normal circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for each device.
Set only if specified by the provider.
It is not required for normal household use.
	Proxy address						Proxy port
	This is the address of the relay server that is connected to the target						This number is specified by the provider together with
	server instead of the browser and sends data to the browser.						the Proxy address.
	Setting is only required if specified by the provider.						Select “Proxy port” and press OK
	Select “Proxy address” and press OK
							Enter the Port number
	Menu VIERA CAST setting				select
			Proxy address		OK		Proxy port	0
			Proxy port	0
							or	select
		Allows manual entry of proxy address for relay
								OK
		server. (normally not required)
	Enter address
	(see “Entering characters” on p. 19)					If you perform the Proxy settings, it may make it
	Proxy address					impossible to view VIERA CAST movie content.

prIo

Select “OK”

Network camera setting (p. 33)

Network Settings

Advanced

Select “Software update”

Menu		Network settings
		Connection test
		Network connection	Wireless (WiFi)
		IP address/DNS	settings
		VIERA CAST setting
		Network cameras list
		Software update
		Mac address	00-0b-97-7c-65-e9
	Check if software update for the TV is
	available

select		Press OK to start the Software update screen
		Follow directions on the screen
OK	*	Set “Clock” first. (p. 17)

The Network settings become effective when you close the menu and run “Connection test”. 49