Panasonic DVD-LA95 operating instructions Troubleshooting Guide, Problem Solution

Troubleshooting Guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or web site (http://www. panasonic.com). In Canada, contact Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, web site (www.panasonic.ca), or an authorized Servicentre closest to you. Reference pages are shown as black circled numbers :.

For Your Reference

46

RQT6025

Problem	Solution
No power.	Check connections to the AC adaptor, built-in battery, or
	battery pack. Make sure you have removed the
	insulation sheet. : ; S
	Confirm the battery charge on the LCD. ;
	You cannot turn on the unit with the remote control if the
	unit is powered by battery.
Unit turns off	The unit turns off after it has been stopped for about
automatically.	15 minutes (5 minutes when the unit is powered by
	battery) to conserve power. Turn the unit on again. <
	You are using the unit in a place that is too hot or too cold.
Cannot charge or the	The built-in battery and battery pack can only be
[CHG] indicator fails to	recharged when the unit is off.
light.
	The charging time increases if the built-in battery or
	battery pack is warm and charging may not be possible
	under some circumstances. Wait for them to cool.
	Check connection to the AC adaptor. Make sure you
	have removed the insulation sheet. :
Unit doesn’t work when	The built-in battery and battery pack have protection
powered by battery.	circuitry that activate if they become too hot or too cold.
	They will not work if this occurs. Use the unit and battery
	between 5 oC (41 oF) and 35 oC (95 oF).
No response when buttons	Some discs prohibit certain operations.
are pressed.
	If there is no response at all, the unit may have been
	affected by lightning or static electricity. Try turning the
	unit off and on again. Alternatively, turn the unit off,
	disconnect the power source (AC or battery) reconnect
	the power and turn the unit on again.
Play fails to start or stops	Condensation may have formed in the unit.
soon after starting.	Wait 1 or 2 hours for it to clear.
	This unit cannot play discs other than those specified. 8
	Clean the disc. 9
	Ensure the disc is inserted correctly. <
	Check that the DVD-RAM has something recorded on it.