Panasonic DVD-LA95 You want to reset the unit, For about 3 seconds until the message Initialized

Problem	Solution
No operation with remote	Check that the battery is inserted correctly. :
control.
	Replace the battery if it is drained. :
	Aim the remote control at the remote control signal
	sensor. :
The audio soundtrack or	Languages can only be selected if they are recorded on
subtitle language cannot	the DVD.
be changed.
	Some DVDs require you to change the languages
	through menus.
Subtitles not shown.	Subtitles appear only if they are recorded on the DVD.
	Turn the subtitles on. @
	Subtitles may fail to appear around the A and B points in
	A-B repeat, and around the points you marked to play
	again.
Angles cannot be	Angles can only be selected if they are recorded on the
changed.	DVD.
	There may be parts of multi-angle DVDs where different
	angles are not recorded.
You have forgotten your	Do the following to reset the unit to its original factory
ratings password.	settings. While the unit is stopped, press and hold
	[;], [:] (backward), and [1, ON] on the main unit	Reference
You want to reset the unit
	for about 3 seconds until the message “Initialized”
to the factory settings.
	disappears from the LCD, then turn the unit off.
There is a lot of noise.	Separate the unit from mobile phones if they are being	Your
	used close to each other.
		For
No sound from the unit’s	The speakers are off if the LCD is closed or headphones
speakers.	are connected. R
	Turn up the volume. <
No sound from other	Check all connections and settings. M–P, R–S, Y–[
speakers.
	Check input mode of the other equipment.
Sound is not heard for	The track may be non-standard.
some tracks.
Distorted sound.	V.S.S. may cause distortion with some discs.
	Turn V.S.S. off if this occurs. A

47

RQT6025