Panasonic TH-85PF12U Selecting the input signal, INPUT1 INPUT2A INPUT2B INPUT3 PC

Page 15

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.

Input signals will change as follows:

INPUT1 INPUT2A INPUT2B INPUT3 PC

SLOT2 is for dual input so that you can select INPUT2A or

INPUT2B for INPUT2.

INPUT2A : HDMI signal terminal in SLOT2

INPUT2B : HDMI signal terminal in SLOT2

Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode.

Press to switch the input mode between INPUT2A and INPUT2B.

Notes:

•Selecting is also possible by pressing the INPUT button on the unit.

•Input terminal will not be selected if the terminal board is not installed into the SLOT.

•Select to match the signals from the source connected to the component/RGB input terminals. (see page 50)

•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

•Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 60), but this function is not the perfect solution to image retention.

ENTER /

+/

VOL

-/

MENU

INPUT

15

Image 15

Contents High Deﬁnition Plasma Display Operating InstructionsEnglish Risk of Electric Shock Do not Open Important Safety Instructions Table of Contents FCC Caution Canadian NoticeTrademark Credits When using the Plasma Display Safety PrecautionsAC Power Supply Cord MaintenanceSafety Precautions SetupAccessories Accessories SuppliedRemote Control Batteries Audio OUT Terminals connection ConnectionsSignal Names for Mini D-sub 15P Connector PC Input Terminals connectionConnections Communication parameters Signal names for D-sub 9P connectorCommand Serial Terminals connectionDVD Hdmi connectionComponent / RGB connection RCA-BNCPower on / OFF Connecting the plug to the Wall OutletRight side surface OSD Language Power on / OFFWhen ﬁrst switching on the unit Present Time SetupINPUT1 INPUT2A INPUT2B INPUT3 PC Selecting the input signalBasic Controls On OFF Basic ControlsAll Aspect mode Aspect ControlsPanasonic Auto During Advanced PIP Selecting the Display ModeAspect Controls During PIPTransparent Function Insertion Function Swapping ScreensDuring Blend PIP Composite Screen Function Transparent Function and Insertion FunctionSelecting the Target Screen for Operations Selecting the Sub Screen Position During P in P DisplayOperations on Main screen Sub screen Select the magniﬁcation required for the enlarged display Digital ZoomDisplay the operation guide Select the area of the image to be enlargedSet Remote Control Unit Display the menu screenOn-Screen Menu Displays Select the itemOverview On-Screen Menu DisplaysAdjusting POS. /SIZE Using Remote ControlAuto mode Adjusting POS. /SIZE OFF On Left On Center On Right 2k1kCinema Picture AdjustmentsStandard DynamicPicture Adjustments Advanced SettingsMEMORY1 Picture ProﬁlesPicture Proﬁles Saving proﬁlesRenaming proﬁles Loading proﬁlesEditing proﬁles Deleting proﬁles NoteLocking proﬁles Memory EditMemory Save Isf Mode Off Isf Mode On Changing passwordsIsf Mode Setting Picture Menu mode displaySDI Sound Output Sound AdjustmentPresent Time Setup SET UP TimerPower OFF Time Function selection Mode selectionStart setting Screensaver For preventing image retentionScreensaver For preventing image retention Setup of Screensaver TimeImage Retention Reduction Menu Extended Life SettingsSide BAR Adjust Reduces screen image retentionNanodrift Saver Extended Life Settings when proﬁle is lockedReset Reduces screen image retentionCustom Settings Reduces power consumption Addition sign Selected Input Customizing the Input labelsSelecting the On-Screen Menu Language SLOT3Landscape Portrait Display OrientationSET UP for Multi Display How to setup Multi DisplayDisplay Number locations for each arrangement Examples ID Cancellation ID Remote Control FunctionSET UP for Multi Display ID remote control button operationInsert Level Transparent Display of the Sub Screen During Blend PIPSub Screen Insertion During Blend PIP PIP Advanced PIP Blend PIPHow to setup Portrait SET UP for PortraitSET UP for Portrait LocationViewing Area Location Component RGB SET UP for Input SignalsComponent / RGB in Select YUV / RGB in SelectSignal menu SET UP for Input Signals3D Y/C Filter For Ntsc AV images Color System XGA ModeColor System / Panasonic Auto PulldownVideo NR, Mosquito NR, Block NR Refresh RateNoise Reduction Advanced NRSDI Through Input signal displaySetting RGB sync signal SyncOptions Options AdjustmentsButton lock Options AdjustmentsNormalization DelayPress Action Button Weekly Command TimerShipping condition Plasma Display panel TroubleshootingFull List of Aspect ModesComponent / RGB DVI-D in ∗8 Applicable Input SignalsApplicable Input Signals Video input HdmiVGA60 Asos Command list of Weekly Command TimerScreen size SpeciﬁcationsFor the U.S.A and Puerto Rico Panasonic Professional Flat Panel Display Limited WarrantyFor Canada Limited Warranty StatementPage Memo Memo Memo Panasonic Canada Inc Customer’s RecordPanasonic Professional Display Company Executive Ofﬁce

Related manuals

Manual 72 pages 31.07 Kb