Panasonic TH-85PF12U operating instructions Applicable Input Signals, Component / RGB DVI-D in ∗8

Applicable Input Signals

							*Mark: Applicable input signal
				Horizontal frequency	Vertical frequency	COMPONENT / RGB IN		DVI-D IN ∗8
	Signal name					/ PC IN
				(kHz)	(Hz)			(Dot clock (MHz))
						(Dot clock (MHz))
1	525	(480) / 60i		15.73	59.94	* (13.5)
2	525	(480) / 60p		31.47	59.94	* (27.0)	∗5	* (27.0)
3	625	(575) / 50i		15.63	50.00	* (13.5)
4	625	(575) / 50p		31.25	50.00	* (27.0)
5	625	(576) / 50p		31.25	50.00			* (27.0)
6	750	(720) / 60p		45.00	60.00	* (74.25)		* (74.25)
7	750	(720) / 50p		37.50	50.00	* (74.25)		* (74.25)
8	1,125	(1,080) / 60p		67.50	60.00	* (148.5)	∗1	* (148.5)
9	1,125	(1,080) / 60i		33.75	60.00	* (74.25)	∗1	* (74.25)
10	1,125	(1,080) / 50p		56.26	50.00	* (148.5)	∗1	* (148.5)
11	1,125	(1,080) / 50i		28.13	50.00	* (74.25)	∗1	* (74.25)
12	1,125	(1,080) / 24sF		27.00	48.00	* (74.25)	∗2
13	1,125	(1,080) / 30p		33.75	30.00	* (74.25)	∗1	* (74.25)
14	1,125	(1,080) / 25p		28.13	25.00	* (74.25)	∗1	* (74.25)
15	1,125	(1,080) / 24p		27.00	24.00	* (74.25)	∗1	* (74.25)
16	1,250	(1,080) / 50i		31.25	50.00	* (74.25)	∗3
17	2,048	× 1,080 / 24sF ∗7		27.00	48.00
18	2,048	× 1,080 / 24p ∗7		27.00	24.00
19	640	× 400 @70 Hz		31.46	70.07	* (25.17)
20	640	× 480 @60 Hz		31.47	59.94	* (25.18)	∗6	* (25.18)
21	640	× 480 @72 Hz		37.86	72.81	* (31.5)
22	640	× 480 @75 Hz		37.50	75.00	* (31.5)
23	640	× 480 @85 Hz		43.27	85.01	* (36.0)
24	800	× 600 @56 Hz		35.16	56.25	* (36.0)
25	800	× 600 @60 Hz		37.88	60.32	* (40.0)		* (40.0)
26	800	× 600 @72 Hz		48.08	72.19	* (50.0)
27	800	× 600 @75 Hz		46.88	75.00	* (49.5)
28	800	× 600 @85 Hz		53.67	85.06	* (56.25)
29	852	× 480 @60 Hz		31.47	59.94	* (33.54)	∗6	* (34.24)
30	1,024	× 768 @50 Hz		39.55	50.00			* (51.89)
31	1,024	× 768 @60 Hz		48.36	60.00	* (65.0)		* (65.0)
32	1,024	× 768 @70 Hz		56.48	70.07	* (75.0)
33	1,024	× 768 @75 Hz		60.02	75.03	* (78.75)
34	1,024	× 768 @85 Hz		68.68	85.00	* (94.5)
35	1,066	× 600 @60 Hz		37.64	59.94	* (53.0)		* (53.0)
36	1,152	× 864 @60 Hz		53.70	60.00			* (81.62)
37	1,152	× 864 @75 Hz		67.50	75.00	* (108.0)
38	1,280	× 768 @60 Hz		47.70	60.00	* (80.14)
39	1,280	× 960 @60 Hz		60.00	60.00	* (108.0)
40	1,280	× 960 @85 Hz		85.94	85.00	* (148.5)
41	1,280	× 1,024 @60 Hz		63.98	60.02	* (108.0)		* (108.0)
42	1,280	× 1,024 @75 Hz		79.98	75.03	* (135.0)
43	1,280	× 1,024 @85 Hz		91.15	85.02	* (157.5)
44	1,366	× 768 @50 Hz		39.55	50.00			* (69.92)
45	1,366	× 768 @60 Hz		48.36	60.00	* (86.71)		* (87.44)
46	1,400	× 1,050 @60 Hz		65.22	60.00			* (122.61)
47	1,600	× 1,200 @60 Hz		75.00	60.00	* (162.0)		* (162.0)
48	1,600	× 1,200 @65 Hz		81.25	65.00	* (175.5)
49	1,920	× 1,080 @60 Hz		67.50	60.00	* (148.5)	∗4	* (148.5)
50	1,920	× 1,200 @60 Hz		74.04	59.95			* (154.0)
51	Macintosh13”		(640 × 480)	35.00	66.67	* (30.24)
52	Macintosh16”		(832 × 624)	49.72	74.54	* (57.28)
53	Macintosh21”		(1,152 × 870)	68.68	75.06	* (100.0)

∗1: Based on SMPTE 274M standard.	∗2: Based on SMPTE RP211 standard.
∗3: Based on SMPTE 295M standard.	∗4: The input signal is recognized as 1,125 (1,080) / 60p.
∗5: When selected the RGB format and 525p signal input to the Mini D-sub 15P terminal, it is recognized as VGA 60Hz signal.
∗6: When inputted VGA 60Hz format signal from the other than Mini D-sub 15P terminal, it is recognized as 525p signal.
∗7: Based on SMPTE 292M and 372M standards. These signals can be received when the Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is installed.

∗8: These signals can be received when the DVI-D Terminal Board (TY-FB11DD) is installed.

Note: Signals without above specification may not be displayed properly.

62