MULTI PIP
Selecting the Target Screen for Operations
Each time this button is pressed, the target screen for operations changes.
Operations on | Operations on |
the main screen | the sub screen |
INPUT1
PC
INPUT1
PC
Main screen | Sub screen |
|
Main screen input mode | Sub screen input mode | |
Notes:
•When operations are performed for the sub screen, the sub screen audio is played.
•If no operations are performed, the operation target returns to the main screen after about 5 seconds*.
You can also return to main screen operations by operating the remote control buttons (except for 
).
*It takes more than 5 seconds if a slot mounted with a Dual HDMI Terminal Board
Selecting the Sub Screen Position (During P IN P Display)
Each time this button is pressed, the sub screen position changes.
Note:
Some sub screen positions may hide the display of the menu screen.
Notes:
•Do not use the
•If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
•Sound output is from the picture which is selected in AUDIO OUT (PIP) (see page 35).
•In
•The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the
•Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
•Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.
•Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
•2k1k signals that are received with the Dual Link
21