Basic Controls
Remote Control Transmitter
R button (see page 23)
Press the R button to return to previous menu screen.
Standby (ON / OFF) button
The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode.
Status button
Press the “Status” button to display the current system status.
1Input label
2Aspect mode (see page 18) NANODRIFT SAVER operating (see page 40)
3Off timer
The off timer indicator is displayed only when the off timer has been set.
4Clock display (see page 57)
N button
(see page 27, 28, 29, 35)
POSITION buttons
ACTION button
Press to make selections.
POS. /SIZE button
| PC | 1 |
| 4:3 | 2 |
| NANODRIFT | |
4 | 10:00 |
|
| OFF TIMER 90 | 3 |
SET UP button (see page 23)
SOUND button (see page 35)
(see page 25)
PICTURE button
(see page 28)
INPUT button
Press to select INPUT1, INPUT2, INPUT3 and PC input SLOTS sequentially. (see page 15)
When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B)
Sound mute On / Off
Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed.
Numeric buttons
(see page 46)
ASPECT button
Press to adjust the aspect. (see page 18)
SURROUND button
The surround setting switches on andoffeachtimetheSURROUND button is pressed.
The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema.
ON OFF
SURROUND ON
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode. (see page 15)
This button is used to switch directly to INPUT mode.
Channel Adjustment
This button cannot be used for this model.
Volume Adjustment
Press the Volume Up “+” or Down
OFF TIMER button
The Plasma Display can be preset to switch to
30 60 90
0
When three minutes remain, “OFF TIMER 3” will flash.
The off timer is cancelled if a power interruption occurs.
Remote ID lock (see page 46)
Digital Zoom (see page 22)
MULTI Window buttons (see page 19)
17