Control with HDMI “HDAVI ControlTM”
Recommended HDMI Connections
Follow the connection diagrams below for HDMI control of a single AV piece of equipment such as a Panasonic DIGA- DVD recorder, RAM Theater or Player Theater system.
Refer to page 22 for Setup Menu settings and additional control information.
Optional HDMI and/or optical cables are not provided.
If connection (or setting) of equipment compatible with HDMI control is changed, switch the power of this unit Off then On again while the power of all equipment is On (to this unit to correctly recognize the connected equipment) and check that DIGA, RAM theater and Player theater playback operates.
ŶConnecting this unit to a DVD recorder, RAM theater or Player theater
•For DIGA :
Connect with HDMI cable
•For RAM theater and Player theater : Connect with HDMI cable and audio cable. Connect the TV’s PROG. OUT audio (L&R) to listen to the TV program through the theater system.
Back of the unit | Note | |
HDMI 1 is recommended. | ||
| ||
| •When connecting to HDMI 2, set the | |
| input mode to HDMI 2 (p. 19) initially | |
| before connecting to HDMI 2. After | |
| connection, confirm the HDMI control | |
| functions (p. |
HDMI cable | Audio Cable |
HDMI | HDMI | Audio | HDMI | Audio |
(AV OUT) | (AV OUT) | IN | (AV OUT) | IN |
or
or
DIGA | Panasonic RAM theater | Panasonic Player theater |
(Panasonic DVD Recorder) |
|
|
ŶSetting of this unit after connection
After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) to “On” using the Setup menu. (p. 22).
Note
•Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
24