Accessories/Options
2Setting-up
Television unit
* Carry out work on a horizontal and level surface.
B |
B |
Rear
Label
Pedestal
Lift the television unit above the pedestal base, with the back of the display unit on the same side as the Label. Then align the holes in the television unit with the poles of the pedestal and lower the television unit into place.
Use the assembly screws B (M5 x 30) to fasten securely.
3Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
For 37'', 42'', 50'' Plasma television
Accessories for pedestal security
1 Band (2) | 2 Screw (2) | 3 Wood screw (2) | 4 Clamp (2) |
Nominal diameter 4 mm x 12
ŶSecuring to a base
Front
Front
D
Wood Worktop
Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws.
ŶSecuring to a wall
* Remove the screws at both top corners on the rear side of the plasma TV, and attach the clamps 4 to the plasma TV using the removed screws.
Screws on main body
Securing method
* Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar.
8