ŶConnecting this unit to a DVD recorder and AV amp
When using an “Control with HDMI”
Optic fiber
HDMI cable
Digital audio input (Optic)
HDMI (AV IN)
•One AV amp and one DIGA can be operated with this unit.
•Be sure to connect the AV amp between this unit and the DIGA.
Note
•HDMI 1 is recommended.
When connecting to HDMI 2, set the input mode to HDMI 2 (p. 19) initially before connecting to HDMI 2. After connection, confirm the HDMI control functions (p.
HDMI (AV OUT)
Panasonic AV amp
HDMI cable
HDMI (AV OUT)
DIGA (Panasonic DVD Recorder)
Control with HDMI “HDAVI ControlTM”
Advanced
ŶSetting of this unit after connection
After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) to “On” using the Setup menu. (p. 22).
Note
•Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
•When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
25