Panasonic DMR-EH60 warranty Specifications, Tiff

Page 67

Specifications

Recordable discs:

DVD-RAM: Ver. 2.0

Ver. 2.1/3k–SPEED DVD-RAM Revision 1.0

Ver. 2.2/5k–SPEED DVD-RAM Revision 2.0

DVD-R:

For General Ver. 2.0

 

For General Ver. 2.0/4k–SPEED DVD-R Revision 1.0

 

For General Ver. 2.x/8k–SPEED DVD-R Revision 3.0

DVD-RW:

Ver. 1.1

 

Ver. 1.1/2k–SPEED DVD-RW Revision 1.0

 

Ver. 1.2/4k–SPEED DVD-RW Revision 2.0

+R:

Ver. 1.0

 

Ver. 1.1

 

Ver. 1.2

Recording system:

DVD-RAM: DVD Video Recording format

DVD-R: DVD-Video format

DVD-RW: DVD-Video format

Internal HDD Capacity: 200 GB

Recording time:

≥Maximum 8 hours (using 4.7 GB disc)

XP: Approx. 1 hour

SP: Approx. 2 hours

LP: Approx. 4 hours

EP: Approx. 6 hours or 8 hours

≥Maximum approx. 355 hours with 200 GB HDD (EP 8H mode)

XP: Approx. 44 hours

SP: Approx. 89 hours

LP: Approx. 177 hours

EP: Approx. 266 hours or 355 hours

Playable discs:

DVD-RAMDVD-R

DVD-RW+R +RW

DVD-Video DVD-Audio

CD-Audio (CD-DA) Video CD

CD-R/CD-RW (CD-DA, Video CD, MP3, JPEG formatted discs)

Optical pick-up:

System with 1 lens, 2 integration units

(662 nm wavelength for DVDs, 795 nm wavelength for CDs)

LASER Specification

Class I LASER Product

Wave Length: 795 nm (CDs) 662 nm (DVDs)

Laser Power:

No hazardous radiation is emitted with

 

the safety protection

Television system

 

 

TV system:

NTSC system, 525 lines, 60 fields

Antenna reception

TV Channel:

2 ch–69 ch

input:

CATV Channel:

1 ch–125 ch

RF converter output:

Not provided

 

The model number and serial number of this product can be found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future reference.

MODEL NUMBER

DMR-EH60

SERIAL NUMBER

Video system

 

 

Recording system:

MPEG2 (Hybrid VBR)

Input:

LINE (pin jack) a3, 1.0 Vp-p; 75 ≠

 

S connector a3

Y:1.0 Vp-p; 75 ≠

 

 

C: 0.286 Vp-p; 75 ≠

Output:

LINE (pin jack) a2, 1.0 Vp-p; 75 ≠

 

S connector a2

Y:1.0 Vp-p; 75 ≠

 

 

C: 0.286 Vp-p; 75 ≠

Component video

Y, PB, PR a1

Y: 1.0 Vp-p; 75 ≠

output:

(480p/480i)

PB: 0.7 Vp-p; 75 ≠

 

 

PR: 0.7 Vp-p; 75 ≠

Audio system

 

 

Recording system:

Dolby Digital (2ch), Linear PCM (XP

 

mode 2ch)

 

Analog Input:

LINE (pin jack) a3

 

 

Reference input: 309 mVrms

 

FS: 2 Vrms (1 kHz, 0 dB)

 

Input impedance: 47 k≠

Analog Output:

LINE (pin jack) a2

 

 

Reference output: 309 mVrms

FS: 2 Vrms (1 kHz, 0 dB)

Output impedance: 1 k≠

(Load impedance: 10 k≠)

Number of channels: Recording: 2 channels

Playback: 2 channels

Digital Output:

Digital audio optical output connector a1

 

(PCM, Dolby Digital, DTS)

SD Card Slot

 

 

Still Picture (JPEG,

SD Memory Card Slot: 1 pc

TIFF)

 

 

Compatible media

SD Memory Card§, MultiMediaCard

 

§ Includes miniSDTM cards. (A miniSDTM

 

adaptor needs to be inserted.)

Format

FAT12, FAT16

Image file format:

JPEG conforming to DCF (Design rule for

 

Camera File system)

 

TIFF (Uncompressed RGB chunky),

 

DPOF Compatible

 

Sub sampling; 4:2:2 or 4:2:0

Number of pixels:

between 34 a 34 and 6144 a 4096 pixels

Thawing time:

Approx. 7 sec (2 M pixels)

SD Card Slot:

 

1 pc

DV input:

 

IEEE 1394 Standard, 4 Pin: 1 pc

G-LINK Terminal:

 

only use the included IR Blaster

Regional Code:

 

‚ 1

Clock unit:

Quartz-controlled 12-hour digital display

Operating temperature range:

5 oC to 40 oC (41 oF to 104 oF)

Operating humidity range: 10 % to 80 % RH (no condensation)

Power supply:

 

AC 120 V, 60

Hz

 

Power consumption:

 

Approx. 31 W

 

Dimensions (WkHkD):

Approx. 430 mmk63 mmk350.5 mm

Reference

 

(Approx.1615/16qk21/2qk1313/16q)

 

 

Mass:

Approx. 4.5 kg (9.92 lbs)

 

 

 

 

 

Power consumption in standby mode:

approx. 13.7 W

 

 

 

 

 

 

 

[Note]

Specifications are subject to change without notice.

Mass and dimensions are approximate.

≥Useable capacity will be less (SD Memory Card).

User memo:

DATE OF PURCHASE _______________________________

DEALER NAME ____________________________________

DEALER ADDRESS _________________________________

__________________________________________________

TELEPHONE NUMBER ______________________________ RQT8307

67

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Example Warranty can be found onImportant Safety Instructions Useful features Table of contentsHDD Hard disk drive handling care Unit care Disc and card handlingInserting/Removing the SD card Playing the disc on other DVD players Using DVD-R, DVD-RW and +R on this unitSAP Remote control AccessoriesBatteries Use DVD Video Recording format DVD-Video format HDD, disc and card informationHDD and discs you can use for recording and play Play-only discs 12 cm 5z/8 cm 3zData that can be recorded and played Instructions Cards useable on this unitDiscs that cannot be played TypeThese operations are also possible… ≥Changing channels RQT8307 Press the Smart Wheel lightly when turning itOpening the front panel Power button Power Í/IMain unit Unit’s displaySec. Quick Start for Recording & EPG Display When the unit is not to be used for a long timeConnection with a television and video cassette recorder To enjoy even higher picture qualityConnection with a cable TV box and video cassette recorder Setting the IR BlasterConnection for transferring dubbing from video tape ConnectionTo enjoy even higher picture quality If the antenna connector doesn’t match Connecting an amplifier or system componentYour television Press Í DVD PowerFollowing the on-screen messages Input the operating environment forSet contents are displayed together Leave this unit in the standby modePress Enter ≥Aspect 43/Aspect Selecting television typePress 3, 4 to select the item and press Enter ReturnTelevision operation Press SetupPress 3, 4 to select Setup Power saving functionRecording television programs Before recording Recording modes and approximate recording timesAfter recording Recording for High-Speed Dubbing Selecting audio to recordPress Audio Flexible RecordingPlaying while you are recording Press 3, 4, 2, 1 to select Scheduled recordingPress the Green button Press TV GuidePress Schedule Enter the settingsTo cancel recording when it has already begun Manually programming scheduled recordingsScheduled recording Using VCR Plusi system to make scheduled recordingsDubbing Press 3, 4 to select the program Check, change or delete a programTo change to the selected channel Utilizing the TV Guide On ScreenTM systemRegistering a program you don’t want to miss as Favorite Promotions screen Setup screenChange channel display menu-CHANNEL Messages screenPlaying recorded video contents/Playing play-only discs Operations during play Changing audio during play Simple editing operations during playPress 3, 4 to select the track and press Enter Using menus to play MP3Using the tree screen to find a group Press TOP MenuPlaying still pictures JPEG/TIFF Play Useful functions during still pictureUsing on-screen menus Using on-screen menus/FUNCTIONS window and Status messagePress Display Press Status Functions windowPress 3, 4 to select an item Status messagesPress 3, 4, 2, 1 to select the chapter Editing titles/chaptersEditing titles/chapters and playing ChaptersChapter operations Title operationsCombine Creating playlists Creating, editing and playing playlistsPress 2, 1 to select the source title and press Press 2, 1 to select the position toPlaylist operations Editing and playing playlists/chaptersPress SUB MENU, then 3, 4 to Select the operation and press EnterPicture and folder operation Editing still picturesTransferring dubbing direction Transferring dubbing modeTransferring dubbing speed mode types and features Transferring dubbing titles or playlistsTransferring dubbing titles or playlists Set the recording modeOne Touch Transfer dubbing Set the transfer dubbing directionPress 3, 4 to select Start Dubbing and press Enter DVD-V HDD ≥If you are not going to change the setting stepWhen the top menu is displayed Set Time LimitPress ¥ REC Recording from a video cassette recorderManual recording Start play on the other equipmentTo register individual still pictures Transferring dubbing using the transferring dubbing listTransferring dubbing still pictures Register still pictures for transfer dubbingSD HDD or RAM To select another folderStructure of folders displayed by this unit Folder and press Enter Press 2, 1 to selectProviding a name for a disc Common proceduresSetting the protection HDD, disc and card managementErasing all titles and playlists-Erase All Titles Erasing all the contents of a disc or card-FormatPress 2, 1 to select Start Enabling discs to be played on other equipmentPress 3, 4 to select Finalize Press 2, 1 to select YesPress Set Entering textShow Enter Name screen Press 3, 4, 2, 1 to select a character and press EnterPress 3, 4 to select the tab and press Changing the unit’s settingsSummary of settings SetupVideo DTS Changing the unit’s settingsTabs Menus ScreenCH W Auto channel/clock settingsAdjust Time Zone Press To select s1 or r1Press 2, 1 to return to the Channel Number column Channel captionsPress 3, 4 to select the caption and press Press 3, 4 to select the first character and pressOn the television MessagesOn the unit’s display Cover Frequently asked questionsPCM DTS TV Guide On Screen TM system Troubleshooting guide Remote control doesn’t Picture quality when adjustedLow volume Cannot switch audioTroubleshooting guide Display No Listing On, and when you try to startTV Guide On ScreenTM system As soon as the unit is turned Scheduled recording, the TVTitle operation Start point Cannot erase chapters ≥This occurs as scenes change during Quick ViewTiff SpecificationsGlossary Product information Product ServicePanasonic Canada Inc Limited WarrantyWarranty Service If YOU Ship the Product to a ServicentreMemo Index
Top Page Image Contents