Panasonic DMR-EH60 warranty Disc and card handling, Unit care, Inserting/Removing the SD card

Page 5

Disc and card handling

∫How to hold a disc or card

Do not touch the recorded surface or the terminal surface.

∫Concerning non-cartridge discs

Be careful about scratches and dirt.

∫If there is dirt or condensation on the disc

Wipe with a damp cloth and then wipe dry.

∫Handling precautions

≥Do not attach labels or stickers to discs. (This may cause disc warping and un-balanced rotation, rendering it unusable.)

≥Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens or other hard writing implements.

≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers.

≥Do not expose the terminals of the card to water, garbage or other strange things.

≥Do not drop, stack, or impact discs. Do not place objects on them. ≥Do not use the following discs:

–Discs with exposed adhesive from removed stickers or labels (rental discs, etc.).

–Discs that are badly warped or cracked. –Irregularly shaped discs, such as heart

shapes.

≥Do not place in the following areas: –In direct sunlight.

–In very dusty or humid areas. –Near a heater.

–Locations susceptible to significant difference in temperature (condensation can occur).

–Where static electricity or electromagnetic waves occur.

≥To protect discs from scratches and dirt, return them to their cases or cartridges when you are not using them.

Getting started

The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by such loss.

Examples of causes of such losses are

≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company. ≥A disc used as described above and then played again in this unit.

≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.

Unit care

The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown.

To clean this unit, wipe with a soft, dry cloth.

≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it impossible to record or play discs.

Use the DVD lens cleaner about once every year, depending on frequency of use and the operating environment. Carefully read the lens cleaner’s instructions before use.

DVD lens cleaner: RP-CL720PP

Do not place the unit on amplifiers or equipment that may become hot.

The heat can damage the unit.

[Note]

Do not obstruct the rear panel’s internal cooling fan.

Before moving the unit, ensure the disc tray is empty.

Failure to do so will risk severely damaging the disc and the unit.

Inserting/Removing the SD card

Only insert or remove the SD card after turning the unit off.

When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card. Such action may result in malfunction or loss of the card’s contents.

Opening the cover

Inserting the card

 

 

Press down.

Press on the center of

If you are using a

 

 

 

 

the card until it clicks into

miniSDTM card, insert it

 

 

place.

into the miniSDTM card

 

 

 

adaptor that comes

 

 

 

with the card.

ADAPTER

 

 

Insert and remove this

 

 

 

adaptor from the unit.

 

 

Insert the card label up with the cut-off

 

 

corner on the right.

 

 

 

(Do not forget to close the cover. ➡ right)

 

Removing the card

Closing the cover

1Press on the center

Push up.

 

of the card.

 

2Pull it straight out.

≥You can use SD Memory Cards with capacities from 8 MB to 1 GB (➡ 9).

Keep the small memory cards such as the SD Memory Card out of reach of children. If swallowed, seek medical advice immediately.

RQT8307

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Example Warranty can be found onImportant Safety Instructions Useful features Table of contentsHDD Hard disk drive handling care Inserting/Removing the SD card Disc and card handlingUnit care SAP Using DVD-R, DVD-RW and +R on this unitPlaying the disc on other DVD players Batteries Use AccessoriesRemote control HDD and discs you can use for recording and play HDD, disc and card informationPlay-only discs 12 cm 5z/8 cm 3z DVD Video Recording format DVD-Video formatDiscs that cannot be played Cards useable on this unitType Data that can be recorded and played InstructionsThese operations are also possible… ≥Changing channels RQT8307 Press the Smart Wheel lightly when turning itMain unit Power button Power Í/IUnit’s display Opening the front panelConnection with a television and video cassette recorder When the unit is not to be used for a long timeTo enjoy even higher picture quality Sec. Quick Start for Recording & EPG DisplayConnection with a cable TV box and video cassette recorder Setting the IR BlasterTo enjoy even higher picture quality ConnectionConnection for transferring dubbing from video tape If the antenna connector doesn’t match Connecting an amplifier or system componentFollowing the on-screen messages Press Í DVD PowerInput the operating environment for Your televisionPress Enter Leave this unit in the standby modeSet contents are displayed together Press 3, 4 to select the item and press Enter Selecting television typeReturn ≥Aspect 43/AspectPress 3, 4 to select Setup Press SetupPower saving function Television operationRecording television programs After recording Recording modes and approximate recording timesBefore recording Press Audio Selecting audio to recordFlexible Recording Recording for High-Speed DubbingPlaying while you are recording Press the Green button Scheduled recordingPress TV Guide Press 3, 4, 2, 1 to selectTo cancel recording when it has already begun Enter the settingsManually programming scheduled recordings Press ScheduleDubbing Using VCR Plusi system to make scheduled recordingsScheduled recording Press 3, 4 to select the program Check, change or delete a programRegistering a program you don’t want to miss as Favorite Utilizing the TV Guide On ScreenTM systemTo change to the selected channel Change channel display menu-CHANNEL Setup screenMessages screen Promotions screenPlaying recorded video contents/Playing play-only discs Operations during play Changing audio during play Simple editing operations during playUsing the tree screen to find a group Using menus to play MP3Press TOP Menu Press 3, 4 to select the track and press EnterPlaying still pictures JPEG/TIFF Play Useful functions during still picturePress Display Using on-screen menus/FUNCTIONS window and Status messageUsing on-screen menus Press 3, 4 to select an item Functions windowStatus messages Press StatusEditing titles/chapters and playing Editing titles/chaptersChapters Press 3, 4, 2, 1 to select the chapterCombine Title operationsChapter operations Press 2, 1 to select the source title and press Creating, editing and playing playlistsPress 2, 1 to select the position to Creating playlistsPress SUB MENU, then 3, 4 to Editing and playing playlists/chaptersSelect the operation and press Enter Playlist operationsPicture and folder operation Editing still picturesTransferring dubbing speed mode types and features Transferring dubbing modeTransferring dubbing titles or playlists Transferring dubbing directionOne Touch Transfer dubbing Set the recording modeSet the transfer dubbing direction Transferring dubbing titles or playlistsPress 3, 4 to select Start Dubbing and press Enter When the top menu is displayed ≥If you are not going to change the setting stepSet Time Limit DVD-V HDDManual recording Recording from a video cassette recorderStart play on the other equipment Press ¥ RECTransferring dubbing still pictures Transferring dubbing using the transferring dubbing listRegister still pictures for transfer dubbing To register individual still picturesStructure of folders displayed by this unit To select another folderFolder and press Enter Press 2, 1 to select SD HDD or RAMSetting the protection Common proceduresHDD, disc and card management Providing a name for a discErasing all titles and playlists-Erase All Titles Erasing all the contents of a disc or card-FormatPress 3, 4 to select Finalize Enabling discs to be played on other equipmentPress 2, 1 to select Yes Press 2, 1 to select StartShow Enter Name screen Entering textPress 3, 4, 2, 1 to select a character and press Enter Press SetSummary of settings Changing the unit’s settingsSetup Press 3, 4 to select the tab and pressVideo Tabs Menus Changing the unit’s settingsScreen DTSAdjust Time Zone Auto channel/clock settingsPress To select s1 or r1 CH WPress 3, 4 to select the caption and press Channel captionsPress 3, 4 to select the first character and press Press 2, 1 to return to the Channel Number columnOn the unit’s display MessagesOn the television PCM DTS Frequently asked questionsCover TV Guide On Screen TM system Troubleshooting guide Low volume Picture quality when adjustedCannot switch audio Remote control doesn’tTroubleshooting guide TV Guide On ScreenTM system As soon as the unit is turned On, and when you try to startScheduled recording, the TV Display No ListingTitle operation Start point Cannot erase chapters ≥This occurs as scenes change during Quick ViewTiff SpecificationsGlossary Product information Product ServiceWarranty Service Limited WarrantyIf YOU Ship the Product to a Servicentre Panasonic Canada IncMemo Index
Top Page Image Contents