Panasonic TH-42PHW6, TH-50PHW6 manual Off

Basic Controls

Stand-by (ON/OFF) button

The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12). Press this button to turn the Plasma Display On, from Stanby mode. Press it again to turn the Plasma Display Off to Stanby mode.

SURROUND button	On		Off
The benefits of surround sound are enormous. You can be
completely enveloped in sound; just as if you were at a
concert hall or cinema.
The surround setting switches on and off each time the
SURROUND button is pressed.		Surround	On
Note:
The surround settings are memorized separately for
each Sound mode (Normal, Auto).

				INPUT button
				(INPUT1, INPUT2, INPUT3 and PC IN Selection)
				Press to select INPUT1, INPUT2, INPUT3 and PC IN input
				SLOTS sequentially. (see page 13)
			INPUT	Sound mute On/Off (see page 19)
	SURROUND			Volume Adjustment
				Press the Volume Up “+” or Down “–” button to increase or
				decrease the sound volume level.
			VOL
				R button (see page 14-15)
N			R	Press the R button to return to previous menu screen.
				ACTION button
				Press to make selections.
				POSITION buttons
				SOUND button (see page 19)
				Press to adjust the SOUND.
PICTURE	SOUND		SET UP
				SET UP button (see page 14-15)
MULTI	SWAP	SELECT MOVE
PIP
				PICTURE POS./SIZE button
PICTURE			ASPECT	(see page 17)
POS. /SIZE
				ASPECT button
				Press to adjust the aspect.
				(see page 16)
PC			OFF TIMER
				OFF TIMER button
				The Plasma Display can be preset to switch to stand-by after a
				fixed period. The setting changes to 30 minutes, 60 minutes, 90
				minutes and 0 minutes (off timer cancelled) each time the button is
PLASMA DISPLAY				pressed.	30	60	90
PC button						0
					When three minutes remain, “Off timer 3” will flash.
Press the “PC” input mode selection button to select the
PC input mode.					The off timer is cancelled if a power interruption occurs.
This button is used to switch directly to PC input mode.

Note:

In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

11