Panasonic TH-42PHW6, TH-50PHW6 manual Sync, Freq. kHz/V-Freq. Hz, Setting RGB sync signal

Page 25

Setup for Input Signals

Sync

Select Signal from the “Setup” menu during RGB input signal.

Press to adjust.

Press to exit from adjust mode.

Setup
Component/RGB-in select	RGB
	RGB
Input label	RGB1
Signal
Screensaver
Power save	Off
Standby save	On
Power management	Off
OSD Language	English (UK)

Press (ACTION) button

Signal		[	RGB	]
Sync		H & V
H-Freq.	31.5	kHz
V-Freq.	60.0	Hz

Setting RGB sync signal:

Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).

H & V:	The H and V sync signals are input from the HD/VD connector.
on G:	Uses a synchronized signal on the Video G signal, which is input
	from the G connector.
CS:	Uses a synchronized signal of Composite Sync input.

Sync	H & V
Sync	on G

SyncCS

H-Freq. (kHz)/V-Freq. (Hz)

Displays the H (Horizontal)/V (Vertical) frequencies.

This display is valid only for RGB/PC input signal.

Display range:
Horizontal	15	- 110 kHz
Vertical	48	- 120 Hz

H-Freq. V-Freq.

31.5kHz

60.0Hz

Image 25

Contents High Definition Plasma Display Operating InstructionsEnglish Model No. TH-42PHW6Important Safety Notice Table of ContentsSetup Safety PrecautionsWhen using the Plasma Display If problems occur during use Cleaning and maintenanceElectric shocks can result if this is not done Trademark CreditsAccessories Supply AccessoriesRemote Control Batteries Speakers ConnectionsTerminals L Speakers Terminals R AC cord connection see AC cord fixingPC Input Terminals connection Signal Names for D-sub 15P ConnectorSDA HD/SYNCCommand Installing the ferrite core Large sizeSerial Terminals connection Communication parametersDVD AV & Component connectionVideo VCR Camcorder VCRBasic Controls Off Power On/Off Power On/Off and input signal selectionConnecting the plug to the Wall Outlet AC cord connectionSelecting the On-Screen Menu Language Select the input signalINPUT1 INPUT2 INPUT3 EnglishusOn-Screen Menu Displays To Signal screen for RGB see To Signal screen for Component seeTo setup Screensaver see page 20 Aspect Controls Adjusting screen Adjusting Picture Pos./SizeHelpful Hint N / Normalise Normalisation Normal Picture AdjustmentsDynamic CinemaMute Sound AdjustmentStart setting Mode selectionScreensaver For preventing after-images Reversal / Scroll selectionThis function may be applicable to the non-picture area Side Panel AdjustmentCustomizing the Input labels Reduces power consumptionPress to change the Input label INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3Component/RGB-in select Setup for Input Signals3D Y/C Filter For Ntsc AV images RGBCinema reality Colour system / Panasonic AutoIf the picture image becomes unstable PAL Secam NtscSync Setting RGB sync signalFreq. kHz/V-Freq. Hz Displays the H Horizontal/V Vertical frequenciesPlasma Display panel Symptoms Check TroubleshootingApplicable input signals for PC Input D-sub 15P ∗ Mark VIDEO/COMPONENT/RGB/PC Input SignalsPAL60 Customer’s Record Specifications