Tuning menu, Setup menu | Panasonic TH-42PA50A specs

Tuning

During TV mode

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose Tuning menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the TV/AV button at any time to go back to watching TV.

Pressing the OK button after having adjusted some features will store the setting as the default (replacing the factory setting).

Sys select	Select the system.
(System Selection)	NZ/INDONES / Australia
	SYS SELECT	REGION
	NZ/INDONES	New Zealand, Indonesia, etc.
	Australia	Australia
Auto tuning	Allows you to automatically retune the TV. Useful if you
	move house and wish to retune your TV to the local stations.
	See page 14.
Manual tuning	Allows individual programme positions to be tuned,
	manually. See page 15.
Sound system	Allows you to change the sound system used for a
	programme channel.
	Choose the required sound system:
	5.5MHz / 6.5MHz
Colour system	Lets you select the correct transmission standard for the
	transmission signal being received. See page 19.
	Auto / PAL / NTSC 4.43 / NTSC 3.58

1 2 3

4 5 6

7 8 9

TV/AVTV

Fine tuning	Use to make small adjustments to the tuning of an individual station (useful for example when
	weather conditions are affecting reception quality of a programme).
	To cancel the Fine tuning, tune again by Manual tuning.
Skip	It is possible to skip Programme Number on which no TV stations are tuned appearing on the
	screen. The function is only effective when pressing the Programme Number up or down button
	either on the TV set or on the remote control. Under the normal viewing, select the Programme
	Number you would like to skip. Then, access Tuning menu and set Skip to On.