Tuning
Auto tuning
Auto tuning automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV
to receive the local stations.
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
Access Tuning menu.
MENU
OK
1 2 3
4 5 6
7 8 9
0
Move to choose Auto tuning.
TV
Notes:
•If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in your TV’s memory will be wiped out so the new settings can be stored).
•If you exit the procedure after this point and before Auto tuning is complete, no station information will be stored. Restart and complete the Auto tuning procedure so that the TV is retuned.
Access Auto tuning.
The TV will search for, locate, store and then sort into order your local stations.
Once this operation is completed the TV will display the programme now stored on programme position 1.
Press the TV/AV button at any time to go back to watching TV (please read the Notes in the above procedure).
TV/AV
12 |
|
AUTO SETUP IN PROGRESS | |
SEARCHING : | PLEASE WAIT |
Exit |
|
Return |
|
Auto tuning (via front panel)
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions:
Press the F button until Tuning mode is reached.
Press the 
button to access Tuning mode.
Press the F button until Auto tuning is reached.
Press the 
button to start search.
Press the TV/AV button at any time to exit the Tuning menu.
Notes:
•If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the Colour system selection on page 13.
•After the Auto tuning is finished, press the Programme Number up button to confirm the tuning condition for each Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme Numbers. Please refer to the Skip function on page 13.
14