Panasonic BT-LH900E manual User data, Saving the user data, Loading the user data

Page 14

User data

This monitor enables the menu settings and screen values which have been adjusted by the image controls to be saved in five user data files which can then be loaded as required.

The following data can be saved and loaded as user data files:

All menu settings (including the function settings of the buttons at the front of the monitor) with the exception of USER MODE LOAD/SAVE

Screen values which have been adjusted by the image controls

Saving the user data

1 When the MENU/EXIT button is pressed, the main menu appears on the screen.

2 Using menu operations (see page 13), select USER MODE SAVE on the SYSTEM CONFIG screen, and press the FUNCTION/ENTER button. The setting is now displayed in green.

[SYSTEM CONFIG]

 

BACK LIGHT

60

FUNCTION

WFM

WFM

FUNCTION

HD ZOOM

FRONT

PEAKING PHASE

PHASE

USER MODE LOAD

FACTORY

1USER MODE SAVE

USER1

MENUEXIT XWSEL ENDisplayed in green.

3 When the file whose data is to be saved is selected from the USER1 to USER5 files and the FUNCTION/ENTER button is then pressed, the screen shown below appears.

[USER MODE SAVE]

USER1

YES

1NO

MENUEXIT XWSEL ENTERSET

4 Align the cursor with YES, and press the FUNCTION/ENTER button.

Loading the user data

1 When the MENU/EXIT button is pressed, the main menu appears on the screen.

2 Using menu operations (see page 13), select USER MODE LOAD on the SYSTEM CONFIG screen, and press the FUNCTION/ENTER button. The setting is now displayed in green.

[SYSTEM CONFIG]

 

 

BACK LIGHT

60

FUNCTION

 

WFM

WFM

FUNCTION

HD ZOOM

 

FRONT

PEAKING PHASE

 

PHASE

1USER MODE LOAD

 

FACTORY

USER MODE SAVE

 

USER1

MENUEXIT XWSEL

 

 

 

Displayed in green.

 

 

 

3 When the file whose data is to be loaded is selected from the FACTORY or USER1 to USER5 files and the FUNCTION/ENTER button is then pressed, the screen shown below appears.

If FACTORY is selected at this time, the data is restored to the factory settings.

[USER MODE LOAD]

USER1

YES

1NO

MENUEXIT XWSEL ENTERSET

4 Align the cursor with YES, and press the FUNCTION/ENTER button.

14

Image 14
Contents BT-LH900E Liquid Crystal Video MonitorRefer servicing to qualified service personnel For your safetyCover. No user serviceable parts inside To reduce the risk of electric shock, do not removeContents Precautions for useIntroduction Tally lamps Power LEDParts and their functions Function buttonsWFM Image controlsFUNCTION/ENTER button WFM function OFF= SDI output connector Battery holderAnalogue component/RGBS connectors Main controls dedicated connectorPlug in the connector until it clicks into place Relocating the main controlsUsing a V-mount battery pack Supplying the powerUsing the Anton Bauer battery pack Reference+12V Pin no SignalCosmetic screws Battery voltage display How to use the on-screen menusChannel and signal format Menu displayImage control display Battery voltage displayConcerning the signal formats MENU/EXIT button Menu operationsMenu operations Loading the user data User dataSaving the user data Menuexit Xwsel ENDisplayed in greenMenu configuration Main MenuUnderlined setting indicates the factory setting mode Menu itemsCentre marker Types of markersMarkers Color Temp Gamma SelectGPI SharpnessFunction User ModeBacklight UndefYpbpr *1 FormatVideo *1 YpbprLevel LocalenableComponent RGB-SYNCList of functions allocated Remote specificationsGPI connector ± Crcc error Error and warning displaysRS-232C connector ± Inverter errorMaintenance timeframe and implementation item Maintenance and inspectionsNecessity for periodic maintenance and servicing Part QuantitySignal formats supported SpecificationsInput connectors Accessories provided with the monitorMemo Memo S1103T0 @