Panasonic BT-LH900E manual Supplying the power, Using the Anton Bauer battery pack, Reference

Page 9

Supplying the power

An Anton Bauer, V-mount or other such type of battery pack or an AC power source can be used to power this monitor.

Using the Anton Bauer battery pack

1 Install the Anton Bauer type of battery pack.

Battery pack

2 Insert the battery pack and slide it in the direction of the arrow.

Release lever

<Reference>

To remove the battery pack, slide it in the opposite direction to the one in which it was attached while keeping the release lever on the battery holder pulled down all the way.

Using a V-mount battery pack

1 Remove the battery holder.

Battery holder

2 Install the accessory metal battery mount.

Metal battery mount

3 Secure the V-mount adapter using the four screws, and

then secure the two screws of the connector section.

This connector is not used.

V-mount adapter

Image 9

Contents Liquid Crystal Video Monitor BT-LH900ECover. No user serviceable parts inside For your safetyRefer servicing to qualified service personnel To reduce the risk of electric shock, do not removePrecautions for use ContentsIntroduction Parts and their functions Power LEDTally lamps Function buttonsFUNCTION/ENTER button Image controlsWFM WFM function OFFAnalogue component/RGBS connectors Battery holder= SDI output connector Main controls dedicated connectorRelocating the main controls Plug in the connector until it clicks into placeUsing the Anton Bauer battery pack Supplying the powerUsing a V-mount battery pack ReferencePin no Signal Cosmetic screws+12V Channel and signal format How to use the on-screen menusBattery voltage display Menu displayBattery voltage display Concerning the signal formatsImage control display Menu operations Menu operationsMENU/EXIT button Saving the user data User dataLoading the user data Menuexit Xwsel ENDisplayed in greenMain Menu Menu configurationMenu items Underlined setting indicates the factory setting modeTypes of markers MarkersCentre marker GPI Gamma SelectColor Temp SharpnessBacklight User ModeFunction UndefVideo *1 FormatYpbpr *1 YpbprComponent LocalenableLevel RGB-SYNCRemote specifications GPI connectorList of functions allocated RS-232C connector Error and warning displays± Crcc error ± Inverter errorNecessity for periodic maintenance and servicing Maintenance and inspectionsMaintenance timeframe and implementation item Part QuantityInput connectors SpecificationsSignal formats supported Accessories provided with the monitorMemo Memo S1103T0 @