Panasonic 40RV52R To connect an Hdmi device, you will need, To view the Hdmi device video

Page 15

Chapter 2: Connecting your TV

Connecting an HDMI™ or DVI device to the HDMI input

The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant[1]consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 56.

Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz

Note: To connect a PC to the HDMI input, see page 18.

To connect an HDMI device, you will need:

•one HDMI cable (type A connector) per HDMI device

−For proper operation, it is recommended that you use an

HDMI cable with the HDMI Logo ( ).

−To display an 1080i/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly.

−HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).

− See “Setting the HDMI™ audio mode” ( page 31).

TV back panel

HDMI device

To view the HDMI device video:

Select the HDMI 1, HDMI 2 or HDMI 3 video input source on the TV.*

*To select the video input source, press INPUT on the remote control

( page 20). To program the TV remote control to operate other devices, see Chapter 3.

To connect a DVI device, you will need:

•one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device

−For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

•one pair of standard analog audio cables per DVI device

−An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

− See “Setting the HDMI™ audio mode” ( page 31).

TV back panel

DVI device

VIDEO

AUDIO

DVI / HDCP

L

R

OUT

 

IN IN

 

 

OUT

L

R

Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV.

[1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high- definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 40RV52R 40RV525R 46RV525R Dear Customer Safety PrecautionsIssue Tune Into SafetyInstallation Important Safety InstructionsInstallation, Care, and Service Additional Safety PrecautionsCare ServiceRemoving the Pedestal Stand To Display your LCD TV using a Wall BracketChoosing a location for your LCD TV To Display your LCD TV on the included Pedestal StandPart Important notes about your LCD TVTrademark Information Contents Introduction Features of your new TVIntroduction Green LED and Toshiba Logo LED TV front and side panel controls and connectionsFor an explanation of cable types and connections, see pages TV back panel connectionsConnecting your TV Overview of cable typesAbout the connection illustrations To view the VCR To view the antenna or Cable signalYou will need To view basic and premium Cable channelsTo record a TV program while watching a DVD To view antenna or Cable channelsTo view the DVD player To view the VCR or view and record antenna channelsTo connect a DVI device, you will need One Hdmi cable type a connector per Hdmi deviceTo connect an Hdmi device, you will need To view the Hdmi device videoBefore controlling the devices REGZA-LINKconnectionStandard audio cables Connecting an audio systemConnecting a digital audio system To control the audioTo connect a PC to the Hdmi terminal on the TV Connecting a personal computer PCPin No Signal To connect a PC to the PC in terminal on the TVRemote control effective range Using the remote controlPreparing the remote control for use Installing the remote control batteriesLearning about the remote control TheaterWide 1/2/3, Full, 43 HD, Native and Dot byDot AUX To use your TV remote control to operate aVCR, set the Mode Select switch to AUX DVD player or HTIB, set the Mode Select switch toAUX 1 VCR Remote Control functional key chartProgramming the remote control to control your other devices Remote control codes Htib Menu layout and navigation Main menu layoutIcon Option Channel Program Start p Scans for new channels on Setup/Installation menu layoutInput Configuration Opens the Input Configuration menu Navigating the menu systemToshiba Logo LED Setting up your TVSetting the Energy Saving Mode Selecting the menu languageProgramming channels into the TV’s channel memory Programming channels automaticallyManually adding and deleting channels in the channel memory Labeling channels To delete the custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To create and assign a custom labelViewing the system status Viewing the digital signal meterSetting the time zone Reset Factory DefaultsUsing the TV’s features Selecting the video input source to viewLabeling the video input sources Tuning channels Tuning channels using Channel BrowserFavorites Browser Elements of the ChannelBrowser Adding and clearing channels and inputs in the History List Setting the Channel Tuning ModeTuning to the next programmed channel Tuning to a specific channel programmed or unprogrammedTo select the picture size using the menus Switching between two channels using Channel ReturnSwitching between two channels using SurfLock To select the picture size using the remote controlTheaterWide For letter box programs with subtitles NaturalTheaterWide For 43 format programs TheaterWide For letter box programsSelecting the cinema mode Using the Freeze featureUsing the auto aspect ratio feature To select the picture mode using the menu system Adjusting the pictureSelecting the picture mode Adjusting the picture qualityCC Selector Using the closed caption modeDigital CC Settings Base closed captionsSelecting stereo/SAP broadcasts Adjusting the audioUsing the digital audio selector Muting the soundTo select the optical audio output format Adjusting the audio qualityUsing the Dolby Digital Dynamic Range Control feature To adjust the audio qualityChanging your PIN code Using the Locks menuEntering the PIN code If you cannot remember your PIN codeTo download the additional rating system if available Using the input lock feature Blocking channelsUnlocking programs temporarily Using the PC settings feature Using the GameTimerUsing the control panel lock feature REGZA-LINKplayback device DVD player, etc. control Setting the PC AudioSetting the sleep timer Using REGZA-LINKOther REGZA-LINKfunctions Volume and Mute controls of Audio ReceiverTo set the REGZA-LINKSetup REGZA-LINKinput source selectionUnderstanding the auto power off feature Understanding the last mode memory featureDisplaying TV status information Using the static gamma feature Using the TV’s advanced featuresUsing the advanced picture settings features Using dynamic contrastUsing the Game Mode feature Using Mpeg noise reductionHighlight Advanced Audio Settings and press Using the advanced audio settings featuresUsing the QSound sound feature To adjust the QSound settingsGeneral troubleshooting TroubleshootingHdmi problems Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsAppendix SpecificationsFormat Resolution Frequency Pixel Clock Frequency Acceptable signal formats for PC in and Hdmi terminalsFor LCD Televisions 26 and Larger Limited United States WarrantyFor Toshiba Brand Flat Panel Televisions Limited Canadian WarrantyDisclaimer and Limitation of Remedy Appendix Toshiba America Consumer PRODUCTS, L.L.C
Top Page Image Contents