Panasonic 40RV525R, 40RV52R, 46RV525R owner manual Appendix, Specifications

Page 56

Chapter 9: Appendix

Specifications

Note:

This model complies with the specifications listed below.

Designs and specifications are subject to change without notice.

This model may not be compatible with features and/or specifications that may be added in the future.

Television System

NTSC standard

ATSC standard (8VSB)

Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted)

Channel Coverage

VHF: 2 through 13

UHF: 14 through 69

Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W)

Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 135)

Power Source: 120 V AC, 60 Hz

Power Maximum Current

40RV52R : 2.75 A

40RV525R: 2.75 A

46RV525R: 2.95 A

Power Consumption

40RV52R : 0.6 W in standby mode

40RV525R: 0.6 W in standby mode

46RV525R: 0.6 W in standby mode

Audio Power:

40RV52R : 10 W + 10 W

40RV525R: 10 W + 10 W

46RV525R: 10 W + 10 W

Speaker Type: Two 1-3/4 × 7-7/8 inches (4.3 × 20 cm)

Video/Audio Terminals

S-VIDEO INPUT:

Y:1 V(p-p), 75 ohm, negative sync.

C:0.286 V(p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k ohm or greater)

ColorStream® (component video) HD INPUT: VIDEO:Y: 1V(p-p), 75 ohm

PR: 0.7 V(p-p), 75 ohm

PB: 0.7 V(p-p), 75 ohm

Suggested formats: 1080i, 720p, 480p, 480i

AUDIO: 150 mV(rms), 22 k ohm or greater

HDMI™ INPUT:

HDMI compliant (type A connector) HDCP compliant

Audio Lip Sync supported

Suggested formats: See table on the next page.

HDMI Audio: 2-channel Linear-PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample

DIGITAL AUDIO OUTPUT:

Optical type

PC INPUT:

15-Pin D-sub Analog RGB

Dimensions

40RV52R:

Width: 3’3-1/4 inches (996.6 mm)

Height: 2’2-7/8 inches (683.3mm)

Depth: 10-7/8 inches (276mm)

40RV525R:

Width: 3’3-1/4 inches (996.6 mm)

Height: 2’2-7/8 inches (683.3mm)

Depth: 10-7/8 inches (276mm)

46RV525R:

Width: 3’8-3/8 inches (1127.5mm)

Height: 2’6 inches (761.1 mm)

Depth: 1’-3/4 inches (325.3 mm)

Mass (Weight)

40RV52R : 39.3 lbs (17.8 kg)

40RV525R: 39.3 lbs (17.8 kg)

46RV525R: 50.2 lbs (22.8 kg)

Operating conditions

Temperature: 32ºF - 95ºF (0ºC - 35ºC)

Humidity: 20 - 80% (no moisture condensation)

Supplied Accessories

Remote control with two size “AAA” batteries

Owner’s manual (this book)

Cleaning cloth

56

Image 56
Contents 40RV52R 40RV525R 46RV525R Safety Precautions IssueTune Into Safety Dear CustomerImportant Safety Instructions Installation, Care, and ServiceAdditional Safety Precautions InstallationService CareTo Display your LCD TV using a Wall Bracket Choosing a location for your LCD TVTo Display your LCD TV on the included Pedestal Stand Removing the Pedestal StandTrademark Information PartImportant notes about your LCD TV Contents Features of your new TV IntroductionIntroduction TV front and side panel controls and connections Green LED and Toshiba Logo LEDTV back panel connections For an explanation of cable types and connections, see pagesAbout the connection illustrations Connecting your TVOverview of cable types To view the antenna or Cable signal You will needTo view basic and premium Cable channels To view the VCRTo view antenna or Cable channels To view the DVD playerTo view the VCR or view and record antenna channels To record a TV program while watching a DVDOne Hdmi cable type a connector per Hdmi device To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needREGZA-LINKconnection Before controlling the devicesConnecting an audio system Connecting a digital audio systemTo control the audio Standard audio cablesConnecting a personal computer PC Pin No SignalTo connect a PC to the PC in terminal on the TV To connect a PC to the Hdmi terminal on the TVUsing the remote control Preparing the remote control for useInstalling the remote control batteries Remote control effective rangeDot Learning about the remote controlTheaterWide 1/2/3, Full, 43 HD, Native and Dot by To use your TV remote control to operate a VCR, set the Mode Select switch to AUXDVD player or HTIB, set the Mode Select switch to AUXRemote Control functional key chart AUX 1 VCRProgramming the remote control to control your other devices Remote control codes Htib Icon Option Menu layout and navigationMain menu layout Setup/Installation menu layout Input Configuration Opens the Input Configuration menuNavigating the menu system Channel Program Start p Scans for new channels onSetting up your TV Setting the Energy Saving ModeSelecting the menu language Toshiba Logo LEDManually adding and deleting channels in the channel memory Programming channels into the TV’s channel memoryProgramming channels automatically Labeling channels Setting the Hdmi audio mode To set the Hdmi audio modeTo create and assign a custom label To delete the custom labelViewing the digital signal meter Setting the time zoneReset Factory Defaults Viewing the system statusLabeling the video input sources Using the TV’s featuresSelecting the video input source to view Favorites Browser Tuning channelsTuning channels using Channel Browser Elements of the ChannelBrowser Setting the Channel Tuning Mode Tuning to the next programmed channelTuning to a specific channel programmed or unprogrammed Adding and clearing channels and inputs in the History ListSwitching between two channels using Channel Return Switching between two channels using SurfLockTo select the picture size using the remote control To select the picture size using the menusNatural TheaterWide For 43 format programsTheaterWide For letter box programs TheaterWide For letter box programs with subtitlesUsing the auto aspect ratio feature Selecting the cinema modeUsing the Freeze feature Adjusting the picture Selecting the picture modeAdjusting the picture quality To select the picture mode using the menu systemUsing the closed caption mode Digital CC SettingsBase closed captions CC SelectorAdjusting the audio Using the digital audio selectorMuting the sound Selecting stereo/SAP broadcastsAdjusting the audio quality Using the Dolby Digital Dynamic Range Control featureTo adjust the audio quality To select the optical audio output formatUsing the Locks menu Entering the PIN codeIf you cannot remember your PIN code Changing your PIN codeTo download the additional rating system if available Unlocking programs temporarily Using the input lock featureBlocking channels Using the control panel lock feature Using the PC settings featureUsing the GameTimer Setting the PC Audio Setting the sleep timerUsing REGZA-LINK REGZA-LINKplayback device DVD player, etc. controlVolume and Mute controls of Audio Receiver To set the REGZA-LINKSetupREGZA-LINKinput source selection Other REGZA-LINKfunctionsDisplaying TV status information Understanding the auto power off featureUnderstanding the last mode memory feature Using the TV’s advanced features Using the advanced picture settings featuresUsing dynamic contrast Using the static gamma featureUsing Mpeg noise reduction Using the Game Mode featureUsing the advanced audio settings features Using the QSound sound featureTo adjust the QSound settings Highlight Advanced Audio Settings and pressTroubleshooting General troubleshootingChannel tuning problems Closed caption problemsRating blocking V-Chip problems Hdmi problemsSpecifications AppendixAcceptable signal formats for PC in and Hdmi terminals Format Resolution Frequency Pixel Clock FrequencyLimited United States Warranty For LCD Televisions 26 and LargerLimited Canadian Warranty For Toshiba Brand Flat Panel TelevisionsDisclaimer and Limitation of Remedy Appendix Toshiba America Consumer PRODUCTS, L.L.C