Panasonic 40RV525R Understanding the auto power off feature, Displaying TV status information

Chapter 6: Using the TV’s features

Displaying TV status information

To display TV status information using RECALL:

Press on the remote control.

The following information will display (if applicable):

•Current input (ANT/CABLE, VIDEO 1, etc.)

•If ANT/CABLE is the current input, either “CABLE” (for cable TV) or “ANT” (for over-the-air broadcasts).

•Channel number (if in ANT/CABLE mode)

•Channel label (if set)

•Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signal only)

•Stereo, Mono or SAP audio status (when HDMI input mode, Dolby Digital or PCM)

•Video resolution

•Aspect ratio of incoming video signal (4:3 or 16:9)

•V-Chip rating status

•Game Timer (if set)

ANT	Stereo SAP 1080i 16:9 TV-PG L V
123-456	9:00pm .
ABCHD

To close the RECALL screen:

Press again.

To display TV status information using INFO:

Press on the remote control.

The following additional information will display for off air digital channels (if applicable):

•Title

•Duration

•Detailed description

Understanding the auto power off feature

The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT/CABLE mode only.

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied.

Note: If it’s possible, and you will be away from the TV for an extended period of time you should unplug the power cord.

Note: The location of the banner can be moved to the top or bottom of the screen by pressing S or T while the RECALL or INFO display is on-screen.

50