Panasonic 46RV525R, 40RV52R Setting the Hdmi audio mode, To create and assign a custom label

Chapter 5: Setting up your TV

To create and assign a custom label:

1 Open the Channel Labeling window.

2 Press or to select a channel you want to label. 3 Press STX to highlight Custom and press .

The software keyboard will appear.

4 Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software keyboard.

5 The highlighted character is entered after you either press a different key, press X key, or after a two-second pause.

6 Repeat steps 4 and 5 until you have entered all desired text.

7 When finished, press .

8 New labels will be added to the list in alphabetical order and marked with an icon to indicate that they are custom. Highlight the new custom label and press to assign.

S

Setting the HDMI™ audio mode

To set the HDMI audio mode:

1 Press and open the Audio menu.

2 Highlight Audio Setup and press .

3 Press S or T to select HDMI 1 Audio and then press

Wor X to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI

input” (		page 15).
	Audio Setup
		PC Audio		No
		HDMI 1 Audio		Auto
		MTS		Stereo
		Language		English
		Optical Output Format		Dolby Digital
		Dolby Digital		Compressed
		Dynamic Range Control
			Reset	Done

ModeDescription

When viewing the HDMI 1 input, if digital audio from the HDMI input is available,

Auto it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input.

Assigned channel labels will be displayed in the banner, Channel Add/Delete, Channels Block, and Channel Browser™.

Digital

When viewing the HDMI 1 input, digital audio from the HDMI input will be output.

When viewing the HDMI 1 input, analog

To delete the custom label:

1 Open the Channel Labeling window.

2 Highlight the label to be deleted and press .

3 Highlight Yes from the deletion confirmation window and press .

Analog audio from the PC Audio input will be output.

4 To save your settings, highlight Done and press .

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 7 on page 11 and “Setting the PC Audio” on page 48.)

4 Highlight Done and press to save changes, and go back to the Channel Labeling window.

31