Panasonic PT 61DLX75 How to connect the PC in Terminals, Connecting a PC to PC, NC Not connected

Installation (continued)

How to connect the PC IN Terminals

Connecting a PC to PC IN

COMPUTER

Audio Input Connector (Shared with both Video 3 and PC)

RGB OUT AUDIO OUT

Connect a cable which matches the audio output terminal on the computer.

Audio cable

(M3 stereo mini pin-PIN cable)

Conversion adapter (If necessary)

RGB cable (D-SUB 15P) (Not included)

PC IN Terminal (D-SUB 15P) Pin Layouts

5 4 3 2 1

10 9 8 7 6

15 14 13 12 11

Connection port view

Notes:

Pin No.	Signal name
1	R
2	G
3	B
4	NC
5	NC
6	Ground for R
7	Ground for G
8	Ground for B

NC: Not connected

Pin No.	Signal name
9	NC
10	Ground
11	NC
12	NC
13	HD/CSYNC
14	VD
15	NC

•Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible D-SUB 15P terminal.

•The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied with this set.

•Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.

•Select the desired PC input position by pressing the TV/VIDEO button. (P. 32)

20 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo