Panasonic PT 61DLX75 manual Procedure, Compatible formats, Audio signal PCM

Procedure

1 Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit.

•If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal.

2 Press TV/VIDEO to select HDMI input.

By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminals of this Projection Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)

Notes:

•Select the HDMI input position by pressing the TV/VIDEO button. (P. 32)

•The HDMI IN terminals can only be used with 1080i, 720p, 480p and 480i picture signals.

•If there is no audio, check if the source equipment has PCM output. If not, please use analog connections.

•Be sure HDMI is securely connected. If not, picture noise and/or incorrect picture display may result.

•With HDMI connection, depending on the signal, the picture may be displayed with unnatural colors (as if red and blue are reversed). Refer to “Color Corr.” on page 41.

Compatible formats

Video Signal:

The Projection Display is compatible with following formats. Please set the connecting device to following format.

Display mode	No. of dots		Vertical scanning frequency	Information menu display
			(Hz)
1080i *	1920	× 1080	59.94 / 60	1080i
720p	1280 × 720		59.94 / 60	720p
480p	720	× 480	59.94 / 60	480p
	640	× 480	59.94 / 60
480i	720	× 480	59.94 / 60	480i

Getting Started

Audio signal (PCM)

When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 kHz/44.1 kHz/ 32 kHz. Refer to “HDMI In” on page 43.

23