Panasonic PT-F100NTE manual Projecting an image, Selecting the input signal, Positioning the image

Page 24

Projecting an image

Basic Operation

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Press the INPUT SELECT buttons to select the required input method if needed. See “Switching the input signal” on page 26.

The image will be projected on the screen.

Positioning the image

1.Open the Front panel cover.

2.Adjust the projected image with the Lens shift lever. See “Lens shift and positioning” on page 18.

3. Adjust the angle of the projector.

Screw down the Front leg adjusters and adjust the angle vertically.

See “Front leg adjusters and throwing angle” on page 17.

NOTE:

SIGNAL SEARCH is ON as default and the signal from the connected devices is detected automatically. See “SIGNAL SEARCH” on page 37.

4.Adjust the focus and the projected image size.

Turn the Focus lever and Zoom lever to adjust the image.

You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See “TEST PATTERN” on page 38.

Focus lever

Zoom lever

NOTE:

Do not touch the Air Exhaust port as this may cause burns or injury.

If keystone distortion occurs, see “KEYSTONE” on page 34.

If you adjust the focus, you may need to adjust the size of the image by moving the Zoom lever again.

ENGLISH - 24

Image 24
Contents PT-F100E Important Safety Notice Model number PT-F100NTE / PT-F100EThis Apparatus Must be Earthed To rain or moistureImportant Safety Notice For business users in the European UnionImportant Safety Information Declaration of ConformityImportant Infomation Contents Settings MaintenanceContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Use only the specified batteriesRemove the used batteries from the remote control promptly Do not put your weight on this projectorDo not mix old and new batteries Electric shocks can result if this is not doneAccessories Minimum required setting screen Read this firstRemote control About Your ProjectorProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view Computer. Selectable for inputOutput by menu operation Setting up Calculation methods for screen dimensionsScreen size and throw distance Projected imageFront leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontAdjusting the Lens shift lever Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connecting with computers ConnectionsBefore connection to the projector LAN terminalConnecting with AV equipment Connecting with Video IN/S-VIDEOConnecting with Component ConnectionsSwitching the projector on/off Power indicatorMains lead Switching on the projector Switching off the projectorSwitching the projector on/off Switch the Main Power on Press the Power buttonSelecting the input signal Projecting an imagePositioning the image Focus lever Zoom leverRemote control operation Setting up the image position automaticallyOperating range Facing to the projectorSwitching the input signal Using the laser pointerResetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projection temporaryControlling the volume of the speaker Enlarging the centred areaEnlarging the image Shifting the centre pointAdjusting with the bar scale items Menu NavigationNavigating through the Menu Displaying the Main menuMain menu and Sub-menu Menu NavigationLive Mode CUT Status Initialise Network StandbyWEB Control Picture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu When the Resizing is set to OFF ResizingFrame Lock Position menuOption menu Power OFF Timer Auto SetupDirect Power on Signal SearchHighland Test PatternInput Password Password ChangeSecurity menu Text DisplayNetwork menu Items in Network menuNetwork menu, the following items are available TEMP, Lamp and Filter Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorReplacing the ARF Auto Rolling Filter Care and Replacement Resetting the Filter When to replace the Lamp unitReplacing the Lamp unit Before replacing the Lamp unitCeiling mount bracket safeguards Care and Replacement Replacement procedureInstalling the safety cable Removing and replacing the lamp unitTroubleshooting List of compatible signals Technical InformationQuality*2 Dots*1 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorLamp switching Switching input SignalsInput signal Remote terminalSpecifications COMPONENT1 OUTAudio Computer AudioScreen size and throw distance for 169 aspect ratio SW m = SD x SH m = SD x LW m = 0.0332 x SD LT m = 0.066 x SDDimensions Trademark acknowledgementsUnit mm These Operating Instructions are printed on recycled paperIndex ALS Ambient Luminance Sensor ARF Auto Rolling FilterCalculation methods LeverIndex S0207-2067C