Panasonic PT-F100NTE, PT-F100E manual Care and Replacement, Cleaning the projector

Page 42

Care and Replacement

Cleaning the projector

Before cleaning the projector

Switch off the MAIN POWER and disconnect the mains plug from the mains socket.

Unplug all the cables from the projector.

Cleaning the outer surface of the projector

Wipe off dirt and dust gently with a soft cloth.

If it is difficult to remove the dirt, soak a cloth in a neutral detergent diluted with water, wring the cloth well and then wipe the projector. Dry off the projector with dry cloth.

If you use a chemical treated wipe, follow the instructions supplied with it.

Cleaning the lens and front glass surface

Wipe off dirt and dust gently with a lint-free cloth.

Make sure no dirt or dust remains on the surface of the lens. It will be enlarged and projected onto a screen.

Replacing the ARF (Auto Rolling Filter)

Before replacing the ARF

Press the POWER button for at least 0.5 seconds or press twice to turn off the projector. Wit until the cooling fan stops and the POWER indicator turn to RED.

Disconnect the Mains lead from the main socket. Prepare a Phillips-head screw driver.

Contact an Authorised Service Centre to purchase a replacement ARF (ET-RFF100).

When to replace the ARF

ARF is consumable product and effects on ventilation. FILTER indicator will inform you of the replacement timing. You can check the remaining amount of the ARF in FILTER REMAINING menu.

NOTE:

•See “FILTER REMAINING” on page 36.

•See “FILTER indicator” on page 41.

Replacement procedure

Maintenance

1.Turn the projector upside down and place it gently on a soft cloth.

2.Use a Phillips-head screwdriver to loosen 3 ARF cover fixing screws until the screws turn freely and remove the ARF cover.

ARF cover fixing screw

5.Attach the ARF cover and tighten the ARF cover fixing screws securely with a Phillips-head screwdriver.

ARF fixing screw

ARF

PUSH 押す

 

Clamp

Soft cloth

ARF cover

NOTE:

3.Use a Phillips-head screwdriver to loosen an ARF fixing screws and release the clamp, then slightly slide up the used ARF to remove.

4.Insert the new ARF into the compartment in correct direction and slightly push down until it clicks. Tighten the ARF fixing screws securely with a Phillips-head screwdriver.

•If the ARF and/or ARF cover are attached incorrectly, the projector may not be turned on.

•Do not switch the power on while the ARF cover removed.

•When you replace the ARF unit, clean the compartment and/or the Air Exhaust port if you need to.

ENGLISH - 42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents PT-F100E This Apparatus Must be Earthed Important Safety NoticeModel number PT-F100NTE / PT-F100E To rain or moistureImportant Safety Notice For business users in the European UnionImportant Safety Information Declaration of ConformityImportant Infomation Contents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteriesDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Electric shocks can result if this is not doneAccessories Minimum required setting screen Read this firstRemote control About Your ProjectorTop and front view Projector bodyAbout Your Projector Control panelAbout Your Projector Back and bottom view Computer. Selectable for inputOutput by menu operation Screen size and throw distance Setting upCalculation methods for screen dimensions Projected imageProjection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontHorizontal shift Adjusting the Lens shift leverLens shift and positioning Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Before connection to the projector Connecting with computersConnections LAN terminalConnecting with Component Connecting with AV equipmentConnecting with Video IN/S-VIDEO ConnectionsSwitching the projector on/off Power indicatorMains lead Switching the projector on/off Switching on the projectorSwitching off the projector Switch the Main Power on Press the Power buttonPositioning the image Selecting the input signalProjecting an image Focus lever Zoom leverOperating range Remote control operationSetting up the image position automatically Facing to the projectorSwitching the input signal Using the laser pointerCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projection temporaryEnlarging the image Controlling the volume of the speakerEnlarging the centred area Shifting the centre pointNavigating through the Menu Adjusting with the bar scale itemsMenu Navigation Displaying the Main menuMain menu and Sub-menu Menu NavigationLive Mode CUT Status Initialise Network StandbyWEB Control Picture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu Frame Lock When the Resizing is set to OFFResizing Position menuOption menu Direct Power on Power OFF TimerAuto Setup Signal SearchHighland Test PatternSecurity menu Input PasswordPassword Change Text DisplayNetwork menu Items in Network menuNetwork menu, the following items are available Lamp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Temp indicatorCare and Replacement Cleaning the projectorReplacing the ARF Auto Rolling Filter Replacing the Lamp unit Care and Replacement Resetting the FilterWhen to replace the Lamp unit Before replacing the Lamp unitInstalling the safety cable Ceiling mount bracket safeguardsCare and Replacement Replacement procedure Removing and replacing the lamp unitTroubleshooting Quality*2 List of compatible signalsTechnical Information Dots*1 KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorInput signal Lamp switchingSwitching input Signals Remote terminalSpecifications Audio COMPONENT1OUT Computer AudioScreen size and throw distance for 169 aspect ratio SW m = SD x SH m = SD x LW m = 0.0332 x SD LT m = 0.066 x SDUnit mm DimensionsTrademark acknowledgements These Operating Instructions are printed on recycled paperCalculation methods IndexALS Ambient Luminance Sensor ARF Auto Rolling Filter LeverIndex S0207-2067C
Top Page Image Contents