Switching the projector on/off
Switching off the projector
(1)(2)
POWER button
POWER indicator
1. Press the POWER button.
The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any operation.
To return to the projection, press any button except the POWER button.
2. Press the POWER button.
The POWER indicator lights up in ORANGE while cooling the lamp, then illuminates RED.
3. Once the POWER indicator is lit red, unplug the Mains lead from the projector.
If you are in a hurry, you can also use the direct power off function while unplugging the Mains lead from the projector. (page 20)
NOTE:
•Press the POWER twice or for a long duration to switch the power off.
•You can disconnect the Mains lead instead of following this procedure. See “DIRECT POWER ON” on page 37.
•You can turn off the projector by pressing the POWER button longer than 0.5 seconds.
Basic Operation