Capturing projected images onto the SD memory card
It is possible to capture images which are being projected from a source such as a connected computer or VCR, and save these captured images onto the SD memory card which has been inserted into the SD memory card slot of the projector. Images can be captured in one of two ways: by using menu screen operations (used principally for still images), or by using the FREEZE button on the remote control unit (used principally for moving images). YPBPR signals and video signals which include
Enabling the FREEZE button for making
capture recordings
#Press the MENU button.
The MAIN MENU screen will be dis- played.
$ Press the F or G arrow button to select "SD CARD".
%Press the ENTER button.
The SD CARD screen will then be displayed.
M E N U
K E Y S T O N E
P I C T U R E
P O S I T I O N
I N D E X W I N D O W
S H U T T E R
A U D I O
L A N G U A G E
O P T I O N
S D C A R D
C A P T U R E
S E L C T 
E N T E R
Note:
BIf "CARD" is selected using the input select (INPUT, RGB) button, the SD CARD screen will be displayed when the MENU button is pressed, instead of the MAIN MENU screen.
&Press the F or G arrow button to select "CAPTURE".
( Press the I or H arrow button so that "FREEZE" is set.
If set to "MENU", the capture function will not operate even when the FREEZE button is pressed.
Note:
S D C A R D
C A P T U R E |
| F R E E Z E | ||
A U T O | P L A Y |
| 6 0 S E C | |
A U T O | L O O P |
| O F F | O N |
|
|
|
|
|
S E L C T | A D J | E S C | ||
BIf the capture setting is set to "FREEZE", only the vertical keystone correction function will be inoperable. (The picture image on the screen will appear to be distorted in the vertical direction, but the captured image will not have this distortion.)
If the FREEZE button is not required for capturing images, or if you do not want the image to appear distorted while projection is paused, change the capture setting to "MENU".
12