Troubleshooting, Before asking for service

Troubleshooting

NO FILE	There are no image files that can be displayed by the
	projector on the SD memory card.
CARD FULL	There is no free space on the SD memory card.
WRITE	The write-protect switch on the SD memory card is set
PROTECTED	to the LOCK position. Capturing, deleting and moving
	files is not possible.
NON STANDARD	A non-standard card has been inserted.
CARD
COPY GUARD	The video signal being input includes a copy guard
SIGNAL	signal. Capturing is not possible with such signals.
LAST FILE	The directory contains only one file, and this file cannot
	be deleted.
NO CARD	No SD memory card has been inserted.
ERROR	An error has occurred with some operation. If the error
	cannot be reset by pressing the input select (INPUT,
	RGB, VIDEO) button, turn off the projector power by
	following the procedure given under "Turning off the
	power" in the PT-L702E or PT-L701E Operating In-
	structions, and then turn the power back on again.

Check the following before asking for service.

Symptom	Check the following
Computer cannot	BHas the PC card adapter been securely inserted
recognise the SD	into the PC card slot of the computer?
memory card	BHas the SD memory card been securely inserted into
	the SD memory card slot of the PC card adapter?
	BHas the driver been installed correctly?
	BAre insufficient computer system resources avail-
	able? (Refer to the Windows online help.)

Writing is not	BIs the write-protect switch on the SD memory card
possible	set to the LOCK position?

Video signals	BIf using a notebook computer, has the external
from the computer	output been configured properly? (It may be pos-
cannot be pro-	sible to toggle the external output settings by press-
jected.	ing the Fn key and the F3 key at the same time. This
	depends on the type of computer you are using.
	Check the computer documentation for details.)