Inserting and removing the SD memory card
Inserting the SD memory card
Make sure that the SD memory card is the right way up when inserting it.
#Open the card slot cover.
Removing the SD memory card
#Open the card slot cover.
$ Check that the access indicator
at the lower left of the slot is not flashing (the SD memory card is not being accessed for reading or writing).
$ Insert the SD memory card as shown below.
Insert the SD memory card so that the side with the label is facing upwards and the end with the
Note: Access indicator
BBefore removing the SD memory card, make sure that the access indicator is not flashing. If the card is removed while the access indicator is flashing, it may result in loss of data on the card.
Note:
BIf you try to force the SD memory card into the slot the wrong way, it may damage the card and the slot.
%Close the card slot cover.
%Push the centre of the SD memory card to unlock it, and then remove the card.
&Close the card slot cover.
10