Panasonic TX-43P800X, TX-51P800X, TX-51P800H, TX-43P800H Convergence Adjustment mode

Page 14

Convergence Adjustment

Convergence Adjustment mode

1

Prior to adjustment, tune the broadcast signal to the video input signal and operate the set for more than 60 minutes. If the location or direction of the set is changed or moved, the display may be out of alignment.

If necessary, carry out the following procedures once with PAL signal

and again with the NTSC signal.

Vertical centre marker

Horizontal centre marker

SET UP

2

Press to display the Setup Menu.

Press to select the “CONVERGENCE”.

Press to access to the “CONVERGENCE” menu.

SETUP MENU
TEXT SELECT	ENGLISH
PICTURE SHIFT	ON
TUNING MENU
LANGUAGE
OWNER ID	ACCESS
CONVERGENCE	ACCESS

3

	Press to select the “CONVERGENCE1” or the “CONVERGENCE2”.			SELECT
	Press to select the “CONVERGENCE1” or the “CONVERGENCE2”.			ACCESS
	Press to access to the function.	Example:	RETURN	TV / AV - EXIT
	Press to access to the function.		CONVERGENCE 1	ACCESS

		CONVERGENCE1
		CONVERGENCE1	CONVERGENCE 2
		is selected.	CONVERGENCE 2
		is selected.

Convergence1 Adjustment for RED, BLUE and GREEN

RED

Press to align the horizontal red line with the horizontal blue line. (Becomes a white line)

Press to align the vertical red line with the vertical blue line. (Becomes a white line)

Press N button to adjust the blue mode. (Stores RED)

CONVERGENCE

RED

ADJUST ADJUST TV / AV -EXIT

N-BLUE

BLUE

Press to align the horizontal blue line with the horizontal yellow line. (Becomes a white line)

Press to align the vertical blue line with the vertical yellow line. (Becomes a white line)

Press N button to adjust the green mode. (Stores BLUE)

Only when you cannot adjust with RED and BLUE proceed to the following GREEN adjustment.

CONVERGENCE

BLUE

ADJUST

ADJUST

TV / AV -EXIT

N-GREEN

Vertical centre marker

GREEN

Repeat above adjustment for each position.

Press to align the horizontal green line with the vertical centre maker.

Press to align the vertical green line with the horizontal centre maker.

Press N button to adjust the red mode. (Stores GREEN)

TV/AV

Press at any time to return to the normal viewing.

CONVERGENCE

GREEN

ADJUST

ADJUST

TV / AV -EXIT

N- RED

Horizontal centre marker

14

Image 14

Contents Operating Instructions TX-43P800X TX-51P800H TX-51P800XTable of contents After-images appear Fixing to a wall Safety Precaution Securing the castersBefore Operating This Set Quick Reference Guide for your TV Set Connecting the Aerial Cable to the RF in TerminalConnecting Headphones Before Operating This SetBattery Installation Connecting the Plug to the Wall OutletHow to Turn the Power On Battery cautionsFunction Refer to Location of ControlsControls and Terminals on the TV STRConnect VCRs and other peripheral equipment How to connect the AV1, 2, 3 or 4 Input TerminalsConnections VHS VCR How to connect the DVD Input TerminalsConnections General Operation STRDirect programme Number VolumeGeneral Operation VCR/DVDOn-Screen menu Display from Remote Control IndexOn-Screen menu Display from Remote Control Colour SYS Auto Fine Tune Skip OFFConvergence1 Adjustment for RED, Blue and Green Convergence AdjustmentConvergence Adjustment mode Convergence Adjustment Tuning ChannelsConvergence2 Adjustment for RED and Blue Tuning Channels Channel SelectionCatv Channel AllocationChina HK/UK Receive ChannelAutomatic Tune Sound SYSManual Tune Manual TuneHelpful Hint Fine Tuning Programme Number SkipHow to Cancel the Skip Function Auto PAL SecamOwner ID Setup Adjustment Child LockCONTRAST, BRIGHTNESS, COLOUR, SHARPNESS, NTSC-TINT Picture AdjustmentMenu Helpful Hint N Normalization Picture AdjustmentScan Mode ModeSound Adjustment BalanceMulti PIP Sound AdjustmentMulti Screen Surround MenuPicture and text Channel SearchMulti Screen StillText Select TV / Teletext modeList / Fastext mode Choose 2 modes List FastextReveal Selection Two waysFulI / Top / Bottom List StoreIndex Teletext News Flash UpdateSub Coded Page Access Index CH SearchVCR / DVD Control Advanced Remote Control OperationStereo Bilingual Sound Selection VCR Manufacturer settingAdvanced Remote Control Operation DVDProjection TV screen TroubleshootingCleaning Component Terminals SpecificationsDimensions W × H × D UHF Band Catv VHF BandCustomer’s Record