Tuning Channels
2
1
Select the “POSITION” or the “DIRECT” (Other than Australia)
CH SELECT
Press to select the “CH SELECT (Channel Select) ” Mode.
Press to select the “POSITION” or the “DIRECT”.
Setting range when the “POS.” (Position) has been selected:
Position
Setting range when the “DIRECT” has been selected: Channel
The channel select indicator will change as follows. | DIRECT | POSITOIN |
CH SELECT | POSITION |
SYS SELECT | ASIA / M.EAST |
AUTO TUNE |
|
MANUAL TUNE |
|
SOUND SYS | 5. 5 MHz |
COLOUR SYS | AUTO |
FINE TUNE |
|
SKIP | OFF |
2Regional System Selection
Press to select the “SYS SELECT”.
Press to select the appropriate system.
The system select indicator will change as follows.
CHINA 
HK/UK 
ASIA/M.EAST 
NZ/INDONES 
AUSTRALIA 
JAPAN 
CATV 
AMERICA 
SPECL VER 
E.EUROPE 
CH SELECT | POSITION |
SYS SELECT | ASIA / M.EAST |
AUTO TUNE |
|
MANUAL TUNE |
|
SOUND SYS | 5. 5 MHz |
COLOUR SYS | AUTO |
FINE TUNE |
|
SKIP | OFF |
System Select by Regional
SYSTEM SELECT | Region | SYSTEM SELECT | Region |
|
|
|
|
CHINA | China | E.EUROPE | CIS, Poland, etc. |
HK / UK | Hong Kong, United Kingdom | SPECL VER | South Africa |
ASIA/M.EAST | Malaysia, Singapore, Thailand, Asia countries, | AMERICA | U.S.A., Chile, Mexico, Panama, Peru, |
| Kuwait, Saudi Arabia, United Arab Emirates, |
| Philippines, Taiwan, Venezuela, etc. |
| Middle East countries, etc. | CATV | USA CATV |
NZ / INDONES | New Zealand, Indonesia, etc. | JAPAN | Japan |
AUSTRALIA | Australia |
|
|
|
|
|
|
Channel Selection
Select the most easily viewed channel selection method.
POSITION SELECT (Other than Australia)
When the Channel Selection is on POS. (Position), and Auto Tune is performed, the unit memories the channels tuned in order from programme No.1.
Press the button | 1 | to view channel 2. |
Press the button | 2 | to view channel 4. |
Press the button | 3 | to view channel 6. |
During position mode various reception channels can be viewed.
Example | Programme | Channel | Received |
| Number | Display | Channel |
|
|
|
|
| 1 | 2 | 2 |
| 2 | 4 | 4 |
| 3 | 6 | 6 |
| 4 | 8 | 8 |
| 5 | 10 | 10 |
| 6 | 12 | 12 |
| 7 | 14 | 14 |
| 8 | 16 | 16 |
| 9 | 18 | 18 |
| 10 | 20 | 20 |
|
|
|
|
DIRECT SELECT
When the Channel Selection is on DIRECT, and Auto Tune is performed, the unit memories the programme number which is the same as the channel tuned.
This method allows you to select the desired channel by pushing the channel display number directly on the remote control to select the station. The channel display numbers for the broadcast stations in each region are listed on page 17.
Example | Programme | Channel | Received |
| Number | Display | Channel |
|
|
|
|
| 1 | – | – |
| 2 | 2 | 2 |
| 3 | – | – |
| 4 | 4 | 4 |
| 5 | – | – |
| 6 | 6 | 6 |
| 7 | – | – |
| 8 | 8 | 8 |
| 9 | – | – |
| 10 | 10 | 10 |
| 20 | 20 | 20 |
|
|
|
|
16