Panasonic TH-37PH10UK manual Aspect Controls, Normal Zoom Full, Panasonic Auto, Normal Full

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Press repeatedly to move through the aspect options:

		NORMAL	ZOOM	FULL
		Panasonic AUTO		JUST
	Note:
	When selecting an input slot that attaches BNC Dual Video Terminal
[from the unit]	Board (TY-FB9BD), Panasonic AUTO cannot be selected.
	The aspect mode changes each time the ENTER button
	is pressed.
INPUT MENU -/ VOL +/ ENTER/
[During MULTI PIP Operations]		NORMAL	FULL
• Picture and Picture, Picture in Picture :
• Others	: Aspect switching is not possible.

Notes:

•For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only.

•For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input, the mode is set to “FULL” mode, and switching is not possible.

•Panasonic AUTO can be selected only during Video signal input.

•The aspect mode is memorized separately for each input terminal.

Mode		Picture			Explanation
	4				NORMAL will display a 4:3 picture at its standard 4:3 size.
	NORMAL
NORMAL		3
	4		16		ZOOM mode magnifies the central section of the picture.
			ZOOM
ZOOM		3		9
	4		16		FULL will display the picture at its maximum size but with slight
			FULL		elongation.
FULL		3		9
	4		16		JUST mode will display a 4:3 picture at its maximum size but with aspect
			JUST		correction applied to the center of the screen so that elongation is only
JUST		3		9	apparent at the left and right edges of the screen. The size of the picture
					will depend on the original signal.
	4		16		The display will automatically become enlarged (depending on the
			Panasonic AUTO		picture source), allowing you to view the picture at its maximum size.
		3		9	Notes:
					• Panasonic AUTO mode is designed to automatically adjust the aspect
					ratio to handle a mix of 16:9 and 4:3 program material. Certain 4:3
Panasonic For an elongated image			Image is expanded		program material, such as stock market data screens, may occasionally
					cause the image size to change unexpectedly. When viewing such
AUTO	4		Changes in
			accordance with the		programs, it is recommended that the ASPECT be set to NORMAL.
		3	Panasonic AUTO		• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with FULL
			mode setting (see		mode, the adjustment is not memorized. When exiting the mode, the
			page 37).		screen will return to a former adjustment.
	For a 4:3 image				• Panasonic AUTO can not be selected while equivalent board of BNC
					Dual Video Terminal Board (TY-FB9BD) is installed.

Note: Do not allow the picture to be displayed in NORMAL mode for an extended period, as this can cause a permanent image retention to remain on the Plasma Display Panel.

19