PIP OPERATION WITH A VCR - NO CABLE BOX
PIP Operation with a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source (VCR) is required to provide a second picture.
Connect your television to a VCR, as shown:
CONNECTION ON BACK OF TV
COMPONENT
VCR
TO AUDIO AMP
L
VIDEO INPUT
INPUT 1
R AUDIO L
PR PB Y/VIDEO
VIDEO OUT ANT IN
Incoming
Cable
L
R
INPUT 2R AUDIO L VIDEO
AUDIO OUT
R
ANT OUT
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with the supplied codes to operate the VCR.
Procedure
Turn the VCR OFF and tune the TV to channel 3.
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The PIP picture is the same as the Main picture, initially.
Press the TV/VIDEO button on the Remote Control to select the VIDEO PIP source. Press the VCR button on the Remote Control and turn ON the VCR.
Press the TV/VCR button on the Remote Control.
Choose channels for PIP frame by pressing VCR CHANNEL up/down buttons on the Remote Control.
Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/ down buttons.
SWAP and RECALL Buttons
The SWAP button switches the PIP and Main Picture source. Press the RECALL button for on screen PIP and Main Picture source status.
9