Tuning Menu
Auto Tuning
This television has been factory tuned to all major city channels. Use the automatic tuning procedure only if you wish to reset ALL Programme Location Numbers. Refer to “Manual tuning” on page 30 if you only want to retune one or two Programme Location Numbers.
The television should be switched ON and the TV/AV Switch set to TV.
When you start the automatic search, the television will automatically search for television broadcasts through both VHF bands and the UHF band. During this process all of the available television broadcast channels will be automatically allocated to sequential Programme Number locations.
Using the Front Panel
1.Push the 
button repeatedly until the Tuning Menu is reached.
2.Push the 
or 
Button to access the Tuning Menu.
3.Push the 
button to access Auto tuning.
4.Push the 
or 
Button to start the search.
Using the Remote Control
1.Push the Set Up (
) button.
2.Push the 
or 
button to select the Tuning Menu.
3.Push the 
or 
button to access the Tuning Menu.
4.Push the 
or 
button to select the Auto tuning.
5.Push the 
or 
button to start the Auto tuning.
The television will automatically allocate each received broadcast signal to a Programme Number, starting at position number 1. “PLEASE WAIT” will flash during the tuning operation. The operation will cease when all available channels have been tuned.
29
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
F | : Return to tuning menu |
TV/AV | : To exit |
5.Push the 
button on the front panel to return
TV/AV
the television to normal operation.
29
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
SETUP | : Return to tuning menu |
TV/AV | : To exit |
6.Push the 
button on the remote control to return the television to normal operation.
Note: Pushing the 
button at any time will stop the Auto tuning and return you to normal viewing.