![](/images/new-backgrounds/1201105/20110569x1.webp)
Remote Control VCR/DVD Operation
Manufacturers’ Code Settings
This remote control has been designed to work with a variety of VCRs and DVD players. In order for this to occur, the setting for the VCR or DVD must be programmed into the Remote Control.
1.To set a VCR, slide the remote control to VCR.
To set a DVD, slide the remote control to DVD.
2.Push the remote control and keep it Pushed.
3.Enter the Manufacturer’s (The codes are shown below).
4.Push the STOP button .
5.Release the remote control VCR or DVD Power Button .
6.Check the operation of the VCR or DVD. If it does not operate correctly, repeat steps 1 to 5 and use an alternate code (if there is one).
VCR CODES
Manufacturer | Code | Manufacturer | Code |
|
|
|
|
Panasonic / | 10, 11, 12, 13 | NEC | 40, 41, 42, 43 |
National |
| ORION | 45, 46 |
AIWA | 15, 16 | Philips | 50 |
FUJITSU | 20 | SANYO | 55, 56, 57, 58 |
HITACHI | 25, 26, 27 | SHARP | 60, 61 |
JVC | 30, 31, 32 | SONY | 65, 66, 67 |
MITSUBISHI | 35, 36 | TOSHIBA | 70, 71 |
|
|
|
|
DVD CODES
ManufacturerCode
Panasonic70
NOTES:
1.If the batteries are removed from the remote control the Manufacturer’s codes are lost and must be reprogrammed.
2.The list of manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that any other manufacturer’s product will work with this remote control.