Tuning Menu
Fine Tuning
In areas of poor reception or constant interference a slight adjustment to the tuning may improve the picture quality.
Using the Front Panel
1.Select the Programme location number you want to fine tune.
2.Push the 
button repeatedly until the Tuning Mode is reached.
3.Push the 
or 
Button to access the Tuning Menu.
4.Push the 
button to access Fine Tune.
Using the Remote Control
1.Select the Programme location number you want to fine tune.
2.Push the Set Up (
) button.
3.Push the 
or 
button to select the Tuning Menu.
4.Push the 
or 
button to access the Tuning Menu.
5.Push the 
or 
button to select the Fine Tune.
Tuning menu |
|
Sys select | Australia |
Auto tuning |
|
Manual tuning |
|
Fine tuning |
|
Skip | Off |
5.Push the 
or 
Button to fine tune the station.
6.The television will fine tune in the direction chosen by you.
7.Push the 
to store the selected station.
8.Push the 
button to return the television to the Tuning Menu.
9.To return the television to normal operation
push the 
button on the remote control or repeatedly push the 
button until the volume
display appears.
10.The on screen display will disappear after a few seconds.
11.Push the 
button on the front panel to return
TV/AV
the television to normal operation.
6.Push the 
or 
button to start the fine tune.
7.The television will fine tune in the direction chosen by you.
8.To store the selected station, push the 
.
9.Push the Set Up (
) button twice to return the television to the Set Up menu.
10.Push the 
button to return the television to normal operation.
Note: Pushing the 
button at any time will stop the Fine tuning and return you to normal viewing.
Canceling the Fine Tuning
To cancel the Fine Tuning follow the Manual tuning procedure on page 30.