![](/images/new-backgrounds/1201105/20110559x1.webp)
Tuning Menu
Manual Tuning
This Television has been factory tuned to all the major city channels. Use this tuning procedure only if you wish to reset individual Programme Numbers. The television should be switched ON and the TV/AV Switch set to TV.
Using the Front Panel
1.Push the button repeatedly until the Tuning Menu is reached.
2.Push the or
Button to access the Tuning Menu.
3.Push the button to access the Manual Tune.
4.Push the or
button to select the Manual Tune.
Manual tuning (Front panel)
: | Search |
|
|
|
|
| |||||||
|
|
|
|
|
| STR | : | To store |
|
|
|
|
|
|
|
|
|
|
| F | : | To exit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| STR | F | +//\ | TV/AV |
|
|
5.Push the button to switch to “Change Programme”.
6.Use the or
buttons to select the programme location number to tune.
7.Push the button to switch to “Search”.
8.Push the or
Button to start the search.
9.The television will automatically search for the next broadcast signal. As each station is found the search will stop. If you do not want this station restart the search.
10.Push the to store the selected station.
11.Push the button to return the television to the Tuning Menu.
12.To return the television to normal operation
push the button on the remote control or
TV/AV
repeatedly push the button until the volume display appears.
Using the Remote Control
1.Push the Set Up () button.
2.Push the or
button to select the Tuning Menu.
3.Push the or
button to access the Tuning Menu.
4.Push the or
button to select the Manual Tune.
29
5.Push the or
button to access the Manual Tune.
6.Push the or
button to select the programme location number to tune.
7.Push the or
button to start the search.
8.The television will automatically search for the next broadcast signal. As each station is found the search will stop. If you do not want this station restart the search.
9.Push the to store the selected station.
10.Push the Set Up () button to return the television to the Tuning menu.
11.Push the button to return the television to normal operation.
Note: Pushing the button at any time will stop the Manual tuning and return you to normal viewing.
Tuning the Television to a VCR
1.Turn the VCR On and either start a known tape playing or set the VCR Test Signal, if fitted, to On (refer to the VCR operating instructions).
2.Repeat steps 2, 3 and 4 of the Manual tuning procedure above. The television will treat the VCR as if it was a normal television broadcast station.
NOTES:
1.The antenna lead must be connected to the VCR and the VCR
2.The picture and sound quality are usually much better if the VCR is connected using the AV Terminals. Please refer to page 37 or 38.