LG Electronics 23LX1RV DVD Menu options Audio, Dolby Digital / DTS / Mpeg, Sample Freq. Frequency

G button and then use D / E button to select Bitstream or PCM.

DVD operation

DVD Menu options - AUDIO

Each DVD disc has a variety of audio output options.

Set the player’s AUDIO options according to the type of audio system you use.

Dolby Digital / DTS / MPEG

DVD-V DivX

AUDIO

Dolby Digital G Bitstream

DTSPCM

MPEG

Sample Freq.

DRC

Vocal

F Prev. ED Move G Select

•Bitstream: Select Bitstream if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.

•PCM (Pulse Code Modulation): Select when connected to a two-chan- nel digital stereo amplifier. DVDs encoded in Dolby Digital, DTS or MPEG will be automatically down- mixed to two-channel PCM audio.

-If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them.

If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of signal through without any further process- ing.

Check the documentation for your amplifier to verify its capabilities.

1 Press the MENU button twice and then use the D / E button to select

AUDIO.

2Press the G button and then use D / E button to select DolbyDigital/DTS / MPEG.

3 Press the

4 Press the ENTER button.

5 Press the EXIT button to resume normal playback.

Sample Freq. (Frequency)			DVD-V
	AUDIO
	Dolby Digital
	DTS
	MPEG	G 48KHz
	Sample Freq.
	DRC	96KHz
	Vocal	ED Move	G Select
	F Prev.

1 Press the MENU button twice and then use the D / E button to select

AUDIO.

2 Press the G button and then use D / E button to select Sample Freq..

3 Press the G button and then use D / E button to select 48KHz or 96KHz. 4 Press the ENTER button.

5 Press the EXIT button to resume normal playback.

43