LG Electronics 23LX1RV owner manual PC Setup, Power Cord Connection, Resolution

PC Setup

1Connect the TV to the PC with the PC cable.

2Connect the PC audio output to the TV's PC SOUND input.

3Turn on the PC.

4Use the TV/AV button on the remote control to select PC.

NOTE

Connect the signal cable (DVI-D cable, Not DVI to D-Sub cable) from the DVI output sock- et of the PC to the DVI input socket of the set when using a PC with DVI output. In some video cards, DVI-Analog output may not be supported.

Monitor Display Specifications

		Horizontal	Vertical
MODE	Resolution
		Frequency(kHz)	Frequency(Hz)
VGA	640x480	31.4	60
SVGA	800x600	37.8	60
XGA	1024x768	48.3	60
WXGA	1280x768	47.6	60
	1360x768	47.6	60

Note

a. For optimum picture quality, use standard WXGA 1360x768 computer output at a 60Hz refresh rate. Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using).

b. If the message Out of range appears on the screen, adjust the PC output to a format listed in the Monitor Display Specifications table.

c. The synchronization input form for Horizontal and Vertical frequencies is separate.

DPM (Display Power Management) mode

If the PC goes to power saving mode, the monitor automatically switches to DPM mode. If you don’t use the PC cable provided, DPM mode may not work.

Power Cord Connection

- Connect the power cord correctly as shown.

AC INPUT

20