System Menu Options
Skip
●To activate Skip, press 2.
➜The current channel will be skipped when you use 3 / 4 to select channels.
●To deactivate Skip, press 1.
➜The channels will be played in sequence when you select normal playback.
Fine Tuning
1Press 3 / 4 to select Fine Tuning.
2Press 1 / 2 to tune your channel.
Auto Memory
1Press 3 / 4 to select Auto Memory.
2Press OK to enter the Auto Memory mode.
SEARCHING | CH 009 |
EXIT
➜The Auto Memory process takes a few minutes, in which the set starts searching channels from the lowest to highest in the standard channel list.
➜When this process ends, the set exits and stores the channels by sequence in the memory.
To exit auto memory
●Press 1 during tuning.
To select the desired channel
●Press 3 / 4.
DVD SETUP
General navigation
The options included in DVD SETUP page are: ‘General Setup’, ‘Speaker Setup’, ‘Dolby Digital Setup’, ‘Video Setup’ and ‘Preference Setup’.
1Press 3 / 4 to highlight an option.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 3 / 4 to highlight the selected item.
4If necessary, press OK to confirm.
5Press 1 / 2 to adjust values/ setting.
●Press DVD SETUP on the remote control.
General Setup
The options included in General Setup page are: ‘TV Display’, ‘OSD Lang’, ‘Captions’ and ‘Screen Saver’.
- - General Setup Page - -
TV display
●Select Normal/PS or Normal/LB for TV display at 4:3 aspect ratio.
●Select Wide for TV display at 16:9 aspect ratio.
OSD Lang
There are three different OSD languages for selection.
●Select English, Spanish or French.
Captions
●Select to activate/deactivate captions ON/OFF during playback.
Screen Saver
●Select to activate/deactivate the screen saver. ➜ To save energy, your activated screensaver automatically powers down to standby mode when the screensaver appears for several minutes.
E n g l i s h
23