Setting the Timer

System Menu Options

Audio, Subtitle, Disc Menu

This setting allows you to hear or read the subtitles of a DVD in your choice of English, Spanish or French etc. if the disc contains multiple languages.

Parental

The rating of DVD discs equipped with the child lock function is content-based and varies with different discs. Depending on the particular disc, you can lock out selected scenes or playback of the entire disc.

1Press 3 / 4 on the remote control to enter parental control.

2Enter its submenu by pressing 2.

3Move the cursor by pressing 3 / 4 to highlight the selected item.

4Press OK to confirm.

Password

Parental control features are password- protected.The original setting is unlocked.This setting allows you to input any password with the Numeric Keypad (0-9).

Note:

– The Default Password is 1369, which is always effective even after you have selected your own password and changed it.To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another place and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot.

Default

You can use this function to reset all settings.

For preference setting, the set must be in the STOP mode.

TIMER SET

This function enables you to set the start and end time for playback in 1 of 4 signal sources. The timer will then automatically switch the system on and off after your defined period.

1Press SET on the remote control to enter the TIMER SET menu as illustrated.

2Highlight TIME and press 1 / 2 to select ON.

3Highlight Power on / Power off and use the Numeric Keypad (0-9) to input the desired start /end time hour and minute.

4Press 1 / 2 to switch between am and pm.

5Make sure that the end time is later than the start time.

6To select your signal source, highlight SIGNAL and press 1 / 2 to select CATV, AIR, FM or AM.

7To select your channel, highlight CHANNEL and use the Numeric Keypad (0-9) to input your desired TV channel.

➜In the CATV signal input mode, there are 124 channels to choose from (2-125).

➜In the AIR signal input mode, there are 68 channels to choose from (2-69).

8Press SET to exit the TIMER SETUP menu. ➜ When playback of the signal source is over, the player enters the STANDBY mode.

To cancel Timer

In the TIMER SETUP menu, highlight TIME and press 1 / 2 to select OFF.

E n g l i s h