Memorex MVUC821 manual Atsc Direct Channel Selection buttons

Press the Power button to turn the unit on; the STANDBY indicator will turn off.

Press the DTV button on the remote to select the DTV option. Make sure the channels have been set into memory, see page 23.

NOTE: You can also press the SOURCE button on the main unit until the display shows ATSC to select the DTV mode. Press the CLOCK button to show the time in the display and press again to show ATSC.

2 1

Adjust the volume level by pressing the VOLUME Up or

Down 2 button.1

		3
2	1	4
		5

For proper operation, before selecting channels, they must be set into the unit’s program memory, see page 23. Press and release the Channel Up/Skip ( ) button or Channel Down/Skip ( ) button . The TVn automatically1 stops at the next channelo set into2memory.

ATSC Direct Channel Selection buttons (0-9)

Use these buttons to select a channel. The channel3 number will appear at the top right corner of the screen. Enter the main channel number, then the - button , then enter the

sub-channel, followed by the ENTER/Play/Pause4 ( )

button 5.®p

32