Setting Up and Configuring Your Axcess
Resetting Axcess
If Axcess fails to respond to front panel or remote commands, or if it responds erroneously, reset it:
1.Hold the POWER ON button down on the remote control until the Standby, MUSIC, NET RADIO, AUX and OG lights flash momentarily. Then release the POWER ON button.
2.When the Standby light stays lit, press the POWER ON button on the remote or the POWER button on the front panel to turn Axcess on.
How Do I Connect Axcess to Entré and the Internet?
Because Axcess is designed to play back content MP3s from Entré or Internet Radio via Entré, you must connect Axcess to Entré, either via a common telephone line or directly. Since Axcess connects to the Internet through Entré, the way you set up Entré’s Internet connection affects how Internet Radio works on Axcess. There are two ways to connect Entré to the Internet:
•
•Broadband (through DSL, a cable modem, or other
To learn more about connecting Entré to the Internet, see “How Do I Connect My Entré to the Internet?” on page 17 of How to Connect and Set Up Your Entré Entertainment Hub.
Because there are many different ways to set up a home network, the following connection diagrams only show the most common ways to connect Axcess and Entré.
Do not plug Axcess’ power cord into a wall outlet until you have completed all the connections.
Establishing a Connection via Dial-Up
If you use a
Entré Dial-Up Internet Connection
2 | Complete Guide to Your Axcess Remote Portal |