LOREX Technology L224 Series instruction manual Advanced Menu Detection

4.7 ADVANCED MENU ___DETECTION

Move the cursor to “DETECTION” and press ”ENTER”. The screen will show the following options.

DETECTION

DETECTION SETUP

DETECTION TIMER

1)DETECTION SETUP:

DETECTION

TITLE	DET	AREA	LS	SS	TS	RE	ALARM
01	ON	SETUP	07	03	02	10	OFF
02	ON	SETUP	07	03	02	10	LOW
03	ON	SETUP	07	03	02	10	HIGH
04	ON	SETUP	07	03	02	10	OFF

a)TITLE:

Show the camera title of each channel.

b)DET:

Select “ON” to activate the motion detection function of the selected channel. Select “OFF” to inactivate the motion detect function of the selected channel.

c)AREA:

Press the “ENTER” button to set the detection area.

Pink blocks represent the area that is not being detected while the transparent blocks are the areas under detection.

Press “ENTER” to confirm the start area

Press ◄ or ► to choose the width of the area

Press ▲ or ▼ to choose the height of the area, and press “ENTER” again to confirm.

Multi-detection areas	Press “－” to set the whole	Press “＋” to set the whole
	area under detection	undetected

17