Memorex MVD2113 owner manual TV operation, Power, Number of bars. If the volume

TV operation

NOTES:

•If a channel with no broadcast is selected, the sound will automati- cally be muted.

•If a station being viewed stops broadcasting, the TV will automati- cally shut itself off after 15 minutes.

14

To turn on the TV/DVD, press
1 POWER.
Adjust the volume level by
2 pressing VOL + or –. The
volume level will be indicated on
the screen by green bars. As the
volume level increases, so do
the number of bars. If the volume			VOLUME	32
decreases, the number of green
bars also decreases.
Set the TV/CABLE menu
3 option to the appropriate	TV	- VHF/UHF channels
position. (See page 17.)	CABLE - CABLE channels
Press the Direct Channel selection
4 buttons to select the channel.				CH 02
TV Mode Direct Channel Selection
When the TV/CABLE menu option
is in the TV position, all channels
can be instantly selected by using
two buttons. (for example, to select
channel 2, press “0”, then “2”. If
you press only “2”, channel
selection will be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order.

CABLE Mode Direct Channel Selection

When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:

TO SELECT Cable TV CHANNELS:

1-9: Press “0” twice, then 1-9 as needed. Example, to select channel 2, press “002”.

10-12: Press “0”, then the remaining 2 digits. Example, to select channel 12, press “012”.

13-99: Press the 2 digits in order. Example, to select channel 36, press “36”.

100-125: Press the 3 digits in order. Example, to select channel 120, press “120”.

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

TV	CABLE
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36
	(A) (W)
	37-59
	(AA) (WW)
	60-85
	(AAA) (ZZZ)
	86-94
	(86) (94)
	95-99
	(A-5) (A-1)
	100-125
	(100) (125)
	01
	(5A)

5P20521A [E] P12-17 14

5/12/04, 2:41 PM